Generally, the vro itself has the vswitch function. If we set it slightly, we may use the vro as a vswitch. The following describes how to set the Alpha vro as a vswitch.
1. log on to the Management page of the Alpha router, go to the router Management page, click DHCP server-DHCP service in the left-side navigation bar, select not to enable DHCP server, and save.
2. Click network parameters-LAN port settings in the left-side Navigation Pane and change the IP address of the LAN port to 192.168.1.254 or another IP address as long as it does not conflict with the local IP address of another computer. Www.2cto.com
3. After the configuration is complete, the Alpha router can be used as a switch. Note that the WAN port of the router must be stopped because it is an Internet port and other lanports are already vswitch ports.
A vro can also be used with a vswitch if it is not set. The above settings are used to prevent network conflicts when the Alpha router is connected to other vrouters, it is best to set it. This article is from