How to use battery doubler to strengthen the storage of notebook battery

Download and install "Battery doubler", start the tool, the program will automatically resident system tray area, to help you monitor battery usage, right click on the tool icon, select "Battery doubler→show main Menu" command, you can open the main interface of the program.

{1} in the "Main" tab, click the "Yes" button in the "Enable Battery doubler" option group to increase battery life. Then click the "Options" button, in the Open dialog box, select the "Force CPU to using 99% power" option, forcing the maximum CPU usage can only reach 99%. Select the "Activate Processor cycling" option so that when CPU usage is below 10%, the frequency is reduced to save voltage.

When the Enable Bat tery doubler feature is enabled, the tool takes over the power management of the system, such as temporarily shutting down unused hardware devices and reducing CPU operating frequency to conserve electricity. But if the CPU itself has built-in power-saving technology, or if you have used the RightMark SPU Clock Utility tool described above to adjust the CPU frequency, it is recommended that the Enable Battery doubler feature be set to No. To avoid the same nature of the software to snatch the control of the CPU frequency.

{2} On the Main tab, click the Yes button in the Enable Turbo Charge option group to enable fast charging, then click the "More" button, select the "Configure" option, and in the dialog box that appears, select "Always Turbo Charge "option. As a result, when a laptop is plugged in, the battery will charge faster than usual, even when the computer is powered on, and is useful for those who are eager to fill the battery and don't want to suspend work.

Tip: The "Turbo charge only computer are idle" option indicates that only when the computer is idle can the battery charge speed be speeded up.

{3} on the "Autonomy" tab, choose whether this tool is primarily to conserve voltage, or to give priority to system performance. It is recommended that when using the battery, select the "Maximum autonomy" option to fully conserve power, while the power supply, you can choose the "Maximum performance" option, let the computer run at full speed.

{4} In the Options tab, you can reduce the performance of individual hardware according to specific requirements to achieve more power-saving effects. In this page from top to bottom is: Reduce hard disk performance, reduce the brightness of the display, reduce the speed of the optical drive, reduce the CPU speed.

Once we have done this, we can verify how much power the battery can save.