How to use diskless system

diskless system How to use, the first is to make a master, the method of making the master plate is not more introduced.

The master plate is ready to install the system, where we recommend using a deep Internet café system V4.0, this system I have been using, feeling good. Install the system there's nothing more to say here. After the installation completes, installs the Maxdos (recommends installs the Maxdos, the attention does not install the anti-virus client), completes the system to make the backup.

Then the installation drive, the use of the Internet café hardware with the drive CD-ROM installation, if the change of Internet cafes do not drive the CD-ROM, you can use a Third-party intelligent driver selection tool, you can also download the Web site suitable for hardware modification of the driver. Note: The selected drive is best through the Microsoft WHQ1 certification, in the product release a period of time before the appearance, product production before the launch.

Driver installation sequence is such: Motherboard chip driver → graphics driver → sound card driver → Nic driver →usb2.0 drive → camera driver. After installation, restart the computer, and then check all drivers are installed successfully, if there are unknown devices, you can search through the network solution.

Then the system settings, the sound icon from the control Panel, the lower right corner of the sound icon to tune out, the microphone this hook, test the microphone. Nvidia Graphics: Properties--Settings--advanced--performance or quality settings > tuning for best performance → vertical sync off → lock refresh rate >85

Modify the Appearance tab inside the Display property, select "Advanced" to select the icon in the item, and change the icon size to 48. Remove the startup items inside the need not to start the item, generally only the input method patches, charging clients, game platform client programs. (such as graphics card, note: Graphics services are also closed, otherwise the system is also loaded when the boot); The above work is completed restart the computer, observe if there is no abnormal situation, if prompted to start a file load failure, immediately check the service, find the corresponding file services to stop and disable. Then restart the computer again until there are no error prompts.

Modify c:windows under the Boot.ini file, the/noexecute=alwaysoff removed, the =optin to =alwaysoff (note in the change before the only read Hook removed, after the change after the hook) here can be modified to reduce the probability of blue screen!

Then there is the installation of system patches and basic plug-ins and system application software! Here you need to note that the software installation path is the system disk.

Turn off unused devices: Windows XP always installs drivers and manages all of the computer's devices as much as possible, which slows down the system's startup speed and causes a lot of system resources to be consumed. In this case, you can in the Device Manager, deactivate devices that are not commonly used, such as PCMCIA cards, modems, infrared devices, printer ports (LPT1), or serial ports (COM1), by double-clicking the device you want to deactivate, and selecting "Do not use this device" on the General tab in its Properties dialog box ( Inactive) ". The restart settings will take effect and enable them from Device Manager when you need to use these devices.

Desktop properties inside the power inside of the shutdown monitor 20 minutes later instead of never. Instead of taking any action when the computer power button is pressed.

Modify the graphics resolution, the general 19-22-inch widescreen to 1440*900 here to pay attention to the change before the resolution to 1024*768, and then to 1440*900, this is for CF game into full screen.