How to use network cable to do VGA line

Materials:

VGA adapter pair (buy the corresponding male or female head for your device);

A wire that is cut according to your actual distance;

Tools:

iron; scissors; stripping pliers; soldering iron; scissors; stripping pliers; such;

Method:

1. First of all to peel off the network line, finishing 8 core

2 to 8 cores to peel off a centimeter of insulation batch skin

3 Next is the welding, the cable and VGA head are welded by the connection diagram below.

4 attached VGA each PIN definition: 15 pin VGA each PIN definition: 1pin-analog signal "red" 2pin-analog signal "green" 3pin-analog Signal "Blue" 4pin-address code 5pin-n/c6pin-simulate "red" ground end 7pin-simulate "green" grounding End 8pin-analog "blue" grounding end 9pin-standby 10pin-digital grounding end 11pin-address code 12pin-address Code 13pin-line field signal 14pin-vertical line field signal 15pin-grounding end (shielding layer)

Just follow the wiring diagram, okay?

45it.com Editor Note: VGA signal in the network upload will interfere with each other, to prevent interference is to make a number of interference-prone signals isolated from each other; For example, the VA signal inside the RGB signal is three mutual interference signal, the three road together transmission, but to prevent mutual interference, you can use grounding shielding line respectively transmission R G B , such as: The use of three AV line transmission (line length is the best, not too many joints, easy to be disturbed)