How to use Rp-pppoe to connect a broadband connection with a username and password

Yesterday I turned over my senior PIII BB. Feel too bad, so in the above installed the FC3, loaded FC3, of course, the first is open XMMS ready to listen to the song, an open to think of, XMMS default is not support MP3, to install MP3 decoder, depressed, Okay, I can surf the internet. The next lame, when I put the BB back to the edge of the network and worry, originally we are using the Unicom broadband Internet access, the direct use of network cables, of course, but also user name and password, if it is XP with the PPPoE, as long as the network connection when the choice to use a user name and password of the broadband connection, Then enter the username and password, connect on the line first. But this is Linux, so I have to lift out of the Shenzhou new BB Internet, under a rp-pppoe-3.6, and then use U disk CP to Linux (don't tell me you will not), in the following order to install:
Decompression rp-pppoe-3.5.tar.gz:
#tar-ZXF rp-pppoe-3.5.tar.gz
Enter the generated directory:
#cd rp-pppoe-3.5
Run script go in your directory:
#./go
If you want to install a graphical interface, you can run the script Go-gui:
#./go-gui
will be compiled and installed automatically.

Call/usr/sbin/adsl-setup for configuration
#adsl-setup
When it appears
>>> Enter your PPPoE user name:
Enter the user name of the ADSL account
When it appears
>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this are likely to be something LIKE/DEV/HME0.
For Linux, it'll be ethn and where ' n ' is a number. (Default eth0):
Enter eth0, or direct return, which is the name of the ADSL-connected NIC
When it appears
>>> Enter The demand values (default NO):
Enter no, or direct return,
When it appears
>>> Enter The DNS information here:
Enter the appropriate DNS server IP address (generally 2), under Magic Linux usually need to enter the server, that is, let the system automatically assign IP address
When it appears
>>> Please enter your PPPoE password:
Enter the password for your ADSL account
When it appears
>>> Choose A type of firewall (0-2):
Enter 0 or 1
When it appears
>>> Accept These settings and adjust configuration files (y/n)?
If you enter the correct information, enter Y, complete the configuration, or enter n re-enter.
The configuration of the connection is complete.
Use commands when finished:
Adsl-start Start PPPOE client software, to connect, if successful, will appear Connected;
Adsl-stop Disconnect from the ISP
Adsl-status View the status of the current connection
The available commands for the graphical interface:
Ppp-set Start PPPOE client software, set up;
Ppp-start Start PPPOE client software, to connect, if successful, will appear Connected;
Ppp-stop Disconnect from the ISP
Ppp-status View the status of the current connection
If you do not know the DNS server IP address, you can first connect under Windows, then enter ipconfig in the command window, and then in the DNS option, you can see the two DNS IP