How to use the flying input method?
When the input method is set to fly Input method, you can click on the status bar of the Voice input button (shortcut key: F6), as shown in the following figure:
Message Fly Input Method
It will pop up after clicking. Voice input is spoken to the microphone at this point. Click the X button (shortcut: ESC) to close the speech bar.
Message Fly Input Method
When you first enable speech, you can adjust your recording device to the best state by requiring you to volume it according to the wizard prompts.
It is recommended that you use an external microphone for voice input to achieve the best recording effect
Voice settings can be set to quiet and noisy mode.
Message Fly Enter the default for you to open the quiet mode, you say after a sentence, to be successful return to the words you just finished, you can continue to say a word, the process is as follows:
In general, when you use the computer for voice input, the noise will affect the recognition effect, at this time, the Input method settings-speech Setup Panel, the speech recognition scene changed to noisy.
In noisy mode, after you say a word, the flying Input method will temporarily stop recording (to shield environmental noise interference). Now you need to click on the microphone to continue the speech input process as follows:
Message Fly Input Method
In addition, you can use the Voice suspension box and the fly microphone for voice input.
Voice Suspension Frame Use method: 1 Click the Input method to set the button-"Click to expand the function-" click "Voice Suspension box" can; 2) Click on the Input Method set button-"Click the first option" Set "-" click "Voice Settings"-"Click the Voice Suspension box" shortcut. Double-click the Voice hover box on your desktop when you use it.
It will be recorded automatically when it is started, and will be recognized by the recording side, you can also click on the Voice suspension box to end the recording.
The use of flying microphone: Click the Input Method Settings button-"Click to expand the function-" click "Flying Microphone" can be;
Open the Radio Microphone Link Wizard, using the flying Microphone scan two-dimensional code can be completed through the phone voice input. (note oh, mobile phones and computers need to be under the same local area network to be able to oh ~)