How to use the stylus printer?

Needle printer has a lot of models, then I will Fujitsu dpk500e printer example, although your model style with my differences, with the worry, for this type of needle printer is similar. After you install the print driver, be sure to set up printer-related features.

Needle-type printers, most of which are push-type printing, you put the paper on the sensor outside, will automatically absorb your papers, and then involved. The steps to set up a printer are described below.

　　LAN Print sharing settings

1, install the printer and its driver, and set the printer as a LAN share.

2, Custom printing paper specifications.

3, other computers to connect the printer and set as the default printer. (This setting is required for invoicing computers)

4, IE Page Setup (invoicing computer needs to do this setting)

Parameter setting in software

1, install the printer and its driver, and set the printer as a LAN share.

Set the shared actions as follows:

Click on the "Start" menu, find "Printers and Faxes", and right-click on the appropriate printer, select "Share" appears as follows, select "Share this printer", modify the share name, and then click OK

2, Custom printing paper specifications.

(up 1) in the blank place right click to select "Server Properties", the following interface appears (according to the following figure in the value set)

Note: Select Create new format, enter the new format name, and the width, height, and so on, depending on the paper you are using.

3, other computers to connect the printer and set as the default printer. (This setting is required for invoicing computers)

On the desktop, double-click My Network Places, and then click View Workgroup Computer to locate and open the computer that has the printer installed (it needs to be in the same workgroup as the computer that provides the print share), and then double-click the printer to see the following map

4, click "Yes" can be; next click on "Start" menu, open "Printers and Faxes", find the LAN printer that you just added, right-click to select "Set as Default printer", and then right-click, select "Printing Preferences", and the following map appears

5, the point of "advanced", the following boundary map appears.

Select the spec name "120" and click "OK", then click OK.

IE Page Setup (this setting is required for invoicing computers)

Open IE Browser, click "File-page settings", the following interface appears (according to the following figure in the values set).

Note: Change the paper size to "120", Empty the header and footer, orientation to portrait, the margin of "left", "right" are set to 7, "up", "Down" empty, and then click "OK" on it.

Parameter setting in software

Click on "System Management-parameter settings-system parameters", according to the values set in the following figure:

Note: Select "Continuous Walk paper", "120", "1".

General Stylus Printer Operation settings

Open Control Panel-printers and Faxes

Right-click on your printer-Properties

Click the corresponding machine icon in the general, select Print Preferences

Switch to paper/quality >> point advanced >> See what kind of paper is used in the paper specification and note the name

Warm tips:

Control Panel-Printers and Faxes right-click on a blank spot (do not point to the printer)

There is a server attribute >> click on the format to find the name of that paper. View the following format description (size) for the paper size set if you can modify, slowly modify the height to the appropriate value, this will be your own slowly test

If you can't change it. Create a new format fill in a table name and then fill in the desired size save again to just look at the printer where the paper used to change the paper to just build the paper can be.

There are a lot of printers that print both before and after. The back is to play a single, there is a hole bit, the front is pushed to print, according to the machine itself set on the A4 or other paper specifications of the size line, put the paper to the printer contact, usually by induction automatically sucked in to the appropriate position, one can press the print, if not printed when the single, He will also automatically quit, for his own printer, I suggest you pay more attention to the temptation, long will know.

In particular, the printing of invoices, remember to test before you start printing, because the invoice for the format requirements are particularly high.