How to use the keyboard shortcut WPS to print wireless network in the SCX-3206W of all-in-one machine

Connect the printer to the computer through the USB data cable, and the wireless router and computer are also in the connection status, at the same time, press and hold the "WPS" button on the machine and the "WPS" or "QSS" button on the router for about 10 seconds. When the wireless network status light blue light flashes, you can just relax, the printer is automatically connected to the computer. After the connection is successful, the printer will automatically print the network configuration page, which contains the printer IP address, subnet mask and Gateway (if the machine does not automatically print the configuration page, press and hold the [WPS] Key for 15 seconds to manually print it ).

 

 

1. After the connection is successful, install the printer driver in the random disc (if the disc is lost, click here to download the driver ).

 

 

2. After the disc is inserted into the optical drive, the installation interface will pop up and select [wireless settings and installation ].

 

 

Select "I accept the terms of the license agreement" and click "next ].

 

 

Select "No, I don't want to send printer information" and click "next ].

 

 

Start device check.

 

Select the name of your wireless network device and click next ].

Enter the network key for the wireless network connection and click next ]. (This key is the password of the wireless router .)

 

After "confirm wireless network settings" appears, click [next ].

 

Wireless network connection.

 

 

After "wireless network settings are complete" appears, disconnect the USB data cable and click "next ].

After "confirm printer connection" appears, click [next ].

After selecting the software and utility to be installed appears, click next ].

After "set printer driver" appears, click [next ].

Select print test page. The machine starts printing. After printing, click next ].