Do you have trouble finding a remote control or changing a battery in a certain corner? TP-LINK Smart Remote Control provides you with unified control of home appliances, in any place where you can access the Internet can control your home appliances.
Smart Remote control through infrared remote control household appliances, itself connected to the home WiFi, associated with the TP-LINK ECS. Install the control APP on your mobile phone, log on to the ECS instance, and operate the remote control. The following figure shows the working topology:
This article introduces
IOS
System mobile phoneHow to use the smart remote control.
Before setting, perform the following operations:
1. Scan and download and install the "Smart Remote Control" mobile APP:
Note:If you scan through WeChat, follow the prompts to open the corresponding version in the browser or download it directly in the APP Store.
2. Connect the mobile phone of the APP to a wireless router that can access the Internet.
3. Enable the smart wireless remote control (switch to the ON key ).
Open the smart wireless remote control APP installed on your mobile phone, and click Create
TP-LINK ID.
Note:TP-LINK ID can be used by the phone to control the remote control.
Enter your mobile phone number or email address, and click
Get verification codeAnd enter the verification code as follows:
Set the password for the TP-LINK account, which is subsequently used to log on to the TP-LINK ID. As follows:
Use the configured username and password to log on, as shown below:
Log on successfully and start the next step.
Click Add new remote control:
APP tip: need to connect the phone to the remote control WiFi signal (TL-Remote_XXXX), according to the prompt:
After the mobile phone is connected to the wireless signal of the remote control, return to the APP and click
Next Step.
Select the Wi-Fi signal in your home, and click and enter the password so that the remote control can connect to the home WiFi:
After the remote control is connected to the WiFi at home, it is automatically bound to the registered TP-LINK ID (communication with the TP-LINK ECS ).
After that, you can give the remote control a name, such as in the living room, it can be called the living room remote control.
In this way, the remote control has been controlled by the mobile phone, and then add the appliances to be controlled.
Select the type (in this example, use the air conditioner as an example ):
Select the air conditioner brand:
Follow the prompts on the page:
After detecting a "drip" sound from the air conditioner, click the button:
If the air conditioner does not respond, follow the prompt for no response.
Test whether the buttons are valid. If all buttons are valid, click"
Confirm valid":
Name the air conditioner to facilitate subsequent control:
Now, the air conditioner has been added.
Keep the smart wireless remote control in the power-on status. You can observe its current power, ensure that the power supply is sufficient, and connect to the home WiFi.
In the future, you need to control the air conditioner. You only need to connect your mobile phone to the Internet, open the smart wireless remote control APP, open the added air conditioner, and perform control.
