How to view the IP address of a vro

Each vro has its own IP address. In case of any problems, you need to check the IP address of the vro. How can this problem be solved? Here we will give you a detailed description of how to view your vro IP address. In order to maintain the stability of the education network, the municipal e-education center requires all units to report the IP address of the vro used. Then, the municipal e-education center binds the IP address of the vro to the MAC address of the vromac, to prevent network instability and Trojan viruses caused by ARP spoofing.

According to the IP addresses reported by various organizations, the correct format should be the fixed vro IP address format allocated by the Education Intranet: "10.188.62.2", and so on. The first two parts should be the education intranet, it must be "10. 188. ", the difference is only the last two parts. For our streets, it may be 62. * Original Yunhe film), or 30. * Or 31. * The original zhaode film) may also be 66. * Original dongba slice ). However, some organizations report the IP address "192.168.1.1", and some report the "automatically obtain the IP address. The former is the Intranet IP address of the vro, and the latter is one of the methods for setting the local connection of the computer after the vro is applied. How can I view the IP address of a vro? A vro is a network device that connects to different network segments. For example, if 100 computers in a school need to access the Internet, the upper-level has only 30 fixed IP addresses, how can these 100 computers access the Internet at the same time? There are two methods:

Method 1: Use the proxy server to access the Internet. It is to set a computer with a higher configuration in the LAN to a server, install two NICs on the server, and set the IP address of the first Nic to 10. 188. *. * set the vro IP address of the second network card to 192.168.0.1, install the agent server software on the computer where the server is located, and set all other computers to 192.168.0.. Of course, some server-side and client-side settings are also required in this process. Different proxy server software has different router configuration methods.

Method 2: Use a vro. Install a router at the LAN egress and set the WAN port IP address for the WAN to 10. 188. *. * set the IP address of the LAN port router to 192.168.1. *, and set the IP addresses of other computers to 192.168.1.. Compared with each other, the router solution has become a mainstream solution for sharing Internet access among multiple computers in small and medium-sized enterprises due to low price, good installation, high reliability, and convenient maintenance. The connection function of the vro is as follows: connect the CERNET of 10. 188. * With the Intranet LAN of 192.168.1. * to smooth the information. The router IP address in this tutorial is the WAN port IP address for the WAN. Therefore, only the format of 10. 188. *. * can be reported.

How can I view the IP address of my vro? Generally, you can view the vro by opening IE and entering 192.168.1.1 as the IP address of the vro itself in the address bar). Then, a logon interface is displayed. The common username and password are "admin ".

After logging on to the vro, you can view the vro IP address on pages such as "system status" and "connection information. Some vrouters do not use the IP address 192.168.1.1, but 192.168.0.1, and some are 192.168.1.254 or 192.168.10.1. the user name and password are also different. Some are sure, some are dear, and some are 1234, the factory values of different vendors are not necessarily the same. If there is a vro product manual, it must be recorded above. If no manual is available, enter the vro model and search for it online. But sometimes it may still fail to enter. It may be the username and password that the vro has previously been rewritten by others. In this way, you can first restore the router to the factory status and then re-enter and re-set the router IP address.