Apsara Stack: ibm rs/6000
Operating system version: AIx 4.3.3.0-10 1. View All adapters in the "available" status in the system F50:/# lsdev-CC adapter-S
Sa0 available 01-s1 standard I/O serial port
SA1 available 01-s2 standard I/O serial port
Siokma0 available 01-k1 keyboard/mouse Adapter
Fda0 available 01-d1 standard I/O diskette Adapter
Scsi0 available 10-60 wide/fast-20 scsi I/O controller
Mga0 available 10-78 gxt120p graphics Adapter
Scsi1 available 10-88 wide/ultra-2 scsi I/O controller
Ssa0 available 20-58 ibm ssa 160 serialraid adapter (14109100)
Sioka0 available 01-k1-00 keyboard Adapter
Siota0 available 01-q1 tablet Adapter
Ppa0 available 01-r1 CHRP ieee1284 (ECP) Parallel Port Adapter
Paud0 available 01-q2 ultimedia Integrated Audio
Ent0 available 10-80 IBM 10/100 Mbps Ethernet PCI adapter (23100020)
Sioma0 available 01-k1-01 mouse Adapter
Ent1 available 20-60 3Com 3c905-tx-ibm fast etherlink XL Nic 2. Run the following command to obtain the microcode level F50:/# lscfg-VL ssa0 of An SSA card.
Device location description
Ssa0 20-58 ibm ssa 160 serialraid Adapter
(14109100) part number...
FRU number...
Serial number ......
EC level...
Manufacturer...
ROS level and ID ...... a400 0000
Loadable microcode level... 05
Device Driver level ...... 00
Displayable message... SSA-ADAPTER
Device specific. (z0) ...... SDRAM = 128
Device specific. (Z1) ...... cache = 32
Device specific. (Z2) ...... uid = 006094bedomainb056
Device specific .. (yl) ...... P2-I1/q1 where ssa0 is the name of the device on this SSA card.
The ROS level and ID (in red) in the output result are microcode levels ). 3. Run the following command to obtain a hard disk's microcode level F50:/# lscfg-VL hdisk0
Device location description
Hdisk0 10-60-00-9, 0 other SCSI disk drive manufacturer ...... IBM
Machine type and model... DDRS-39130W
Part number... 1997.
ROS level and ID... 53393742
Serial number ...... re3l6907
EC level ...... all rights
FRU number.
Device specific. (z0) ...... 000002029f00003a
Device specific. (Z1 )........
Device specific. (Z2) ......) Co
Device specific. (Z3) ...... pyrig
Device specific. (Z4) ...... t IB
Device specific. (z5) ...... m
Device specific. (z6 )........ the ROS level and ID (in red) in the output result are the microcode level. It seems that the hard disk on the IBM fast t array cannot obtain the microcode level with the above name.
