How to write a Linux system to a USB drive

First, preparatory work

1, ultraiso "soft disk pass" software

UltraISO PE (Soft disk pass) V9.5.3.2901 Simplified Chinese Green single file version

Download Address: http://www.xitongzhijia.net/soft/18987.html

2, Ubuntu 10.04 system or other version of Linux system

3, need to make U disk system u disk one

Second, the Operation steps

The first step: First insert U disk to the computer host USB interface (recommended inserted into the mainframe box after the USB interface), and then open the UltraISO software, and then open the select need to write to the U disk Ubuntu 10.04 or other versions of the Linux system of the ISO image package, as shown below:

3 Step Two: Click on "Startup Disc", then mouse move Select to "Write hard disk image" and click the left mouse button, the following figure:

A window is written to the hard drive image, it is noteworthy that the hard drive where we want to see is that we have just inserted the USB interface of the U disk, that is, we need to write the U disk, do not make a mistake.

Write the way we can by default, and then click "Easy to Start", select to "Write New drive boot area", and then the right to move to the "Syslinux" item, click the mouse! The following figure:

U start warm tip: "Syslinux" This choice is very important, the network circulated a lot of tutorials on this kind of neglect this step, resulting in the final production failure.

Click "Yes (Y)" to continue, as shown below:

A "write to boot Sector success" Prompt window will pop up, as shown in the following figure:

Step three: That is, to continue with the previous step, we click on "Write" to continue, meaning that the entire ISO image package is written to our U disk, as shown below:

Clicking on the "Write" button will pop up a certain window, which means that you can further confirm that the ISO image package is written to the U disk, we just click on the "Yes (Y)" button, the following figure:

Now start writing to the Linux system's ISO mirrored package to the U disk, as shown below:

When writing to the U disk we should pay attention to: Try not to do other operations, we recommend patience to wait for its write success! The following figure:

OK, you're done, the U disk is written to the Ubuntu Linux system, and the next thing we can do is install the Ubuntu system with this nice, bootable u disk.

Tip: Set the BIOS boot sequence, which is what we often refer to setting u disk boot Oh! Because we only set the BIOS first boot sequence for the U disk, you can boot from the U disk to carry out the U-tray system.

First go to the BIOS setup interface, and then locate: "Advanced BIOS Setup"-"harddisk"-"primary Boot Device"-"USB 2.0 Disk"

When the BIOS is set up, press the F10 key to save and exit, then automatically restart the computer, and finally enter the U-Tray system interface.

After the detailed preparation work and specific graphics and text tutorial demo, in the U disk to write the operation of the Linux system is basically completed, where the need for the body incense Everyone is different licensing computer settings bios, the user can not completely according to the way described above to set.