Start the server, press F10 to start the HP Intelligent Provisioning, then select Perform Maintenance, then select HP Smart Storage Administrator (HP SSA) to open H The P SSA graphical interface is configured for RAID.
1. If intelligent Provisioning is disabled, what to do, can be restarted, then press F9, then proceed to the next step in, that is, into the BIOS, and then put intelligent Provisioning This option is changed from disenabled to Enabled.
2. After configuring the raid, reboot and install the system. Don't forget to put the system disk in the optical drive.
Note: The HP DL380 G9 boot program has been integrated into the motherboard without the need for additional disc boot smartstart8.4, etc.
This article is from the "8174069" blog, please be sure to keep this source http://8184069.blog.51cto.com/8174069/1739416
HP DL380 G9 Configuration raid