Hp dx 2710 cannot be installed

Hp dx 2710 cannot be installed

The status is as follows:

After the installation is completed, the file is copied and restarted.

The following text interface is displayed:

Windows cannot be started due to hardware configuration issues on the computer disk, and the selected boot disk cannot be read, check the boot path and disk hardware. For more information about disk configuration in the Windows documentation, see your hardware reference manual...

How can this problem be solved! For SATA hard disks and optical drive lines, find a Windows integrated SATA driver to install the operating system.

Then accept the Technical Support

Change the power supply options in the BIOS project, that is:

Press F10 to go To the BIOS settings page, select the power option, and change the wdrt support value to disable, that is, disable

Press F10 to save and restart

The startup directory is found, but only the cursor is left on the black screen.

How can this problem be solved?

Re-enter the BIOS settings, restore the BIOS settings to the default value, save the settings, and restart the system to enter the BIOS settings, disable wdrt support.

Then save and restart, boot from the CD to enter the installation interface, and reinstall the operating system successfully.

Wdrt is a watchdog resource table, dongle. It is estimated that the design on HP computer hardware attempts to reject installation of non-random operating systems through this encryption protection.

When this service is enabled, the installed operating system cannot be accessed immediately. The following prompt is also displayed:

"The disk cannot be started because of disk hardware configuration problems on the computer. The selected boot disk cannot be read. Check the boot path and disk hardware. For more information, see the disk configuration in this document and your hardware reference manual ."