Hpux operating system tape backup and recovery

Hpux operating system tape backup and recovery I. scan the tape drive (note: Clean the drive regularly) ioscan-fnCtapeClassIH/WPathDriverS/WStateH/WTypeDescription... hpux operating system tape backup and recovery I. scan the tape drive (note: regularly clean the drive with the cleaning tape) ioscan-fnC tapeClass I H/W Path Driver S/W State H/W Type Description ================== ========================================================== =========== tape 2 0/0/11/1/1.3.0 stape claimed device hp C5683A/dev/rmt/2 m/dev/rmt/2mn/dev/rmt /c3t3d0BEST/dev/rmt/c3t3d0B ESTn/dev/rmt/2 mb/dev/rmt/2mnb/dev/rmt/c3t3d0BESTb/dev/rmt/c3t3d0BESTnbtape 0 0/0/14/1/0.11.8.20.0.0.0 stape claimed device archive Python/dev/ rmt/0 m/dev/rmt/0mn/dev/rmt/c12t0d0BEST/dev/rmt/c12t0d0BESTn/dev/rmt/0 mb/dev/rmt/0mnb/dev/rmt/ c12t0d0BESTb/dev/rmt/Route 1 0/0/14/1/0.11.8.20.0.0.1 stape claimed device archive Python/dev/rmt/1 m/dev/rmt/1mn/dev/rmt/c12t0d1BEST/de V/rmt/c12t0d1BESTn/dev/rmt/1 mb/dev/rmt/1mnb/dev/rmt/logs/dev/rmt/Logs 3 6/0/14/1/0.22.8.1_0.0.0 stape CLAIMED DEVICE ARCHIVE python/dev/rmt/3 m/dev/rmt/3mn/dev/rmt/c28t0d0BEST/dev/rmt/c28t0d0BESTn/dev/rmt/3 mb/dev/rmt/3mnb/ dev/rmt/c28t0d0BESTb/dev/rmt/IPv4 6/0/14/1/0.22.8.20.0.0.1 stape claimed device archive Python/dev/rmt/4 m/dev/rmt/4mn/dev/rmt /C28t0d1BEST/dev/rmt/c28t0d1BESTn/dev/rmt/4 mb/dev/rmt/4mnb/dev/rmt/logs/dev/rmt/c28t0d1BESTn ioscan-fnC tapeClass I H/ W Path Driver S/W State H/W Type Description ============================== ========================================================== = tape 0 0/1/1/1.3.0 stape claimed device hp C5683A/dev/rmt/0 m/dev/rmt/0mn/dev/rmt/c3t3d0BEST/dev/rmt/c3t3d0BESTn/dev /rmt/c3t3d0DDS/dev/rmt/c3t3d0DDSn /Dev/rmt/0 mb/dev/rmt/0mnb/dev/rmt/c3t3d0BESTb/dev/rmt/c3t3d0BESTnb/dev/rmt/c3t3d0DDSnb 2. back up tapes according to the tape type, put the same type of tape/opt/ignite/bin (this is the directory where make_tape_recovery is located) make_tape_recovery-A v (default tape/dev/rmt/0mn, note: If the scanned disk is of the/dev/rmt/0mn type and is of the HP type, you can directly use the preceding command. If the scanned disk is/dev/rmt/2mn (or other) and the disk type is HP, you must specify the path: make_tape_recovery-A v-a/dev/rmt/2mn-A: specify the Root disk/Volume Group-v to be backed up: displays the prompt information for the backup process-a: specifies the path for successful Backup. the displayed information is as follows: * Creating local directories for configuration files and archive. ======= 07/09/13 18:05:23 EAT Started make_tape_recovery. (Tue Jul 09 18:05:23 EAT 2013) @ (#) Ignite-UX Revision C.6.0.115 @ (#) net_recovery (opt) $ Revision: 10.655 $ * Testing Pax for needed patch * Passed pax tests. * Checking Versions of Ignite-UX filesets * Creating System Configuration. */opt/ignite/bin/save_config-f/var/opt/ignite/recovery/2009-03-31,15: 48/system_cfg vg00 * Backing Up Volume Group/dev/vg00 */usr/sbin/vgcfgbackup/dev/vg00 * Creating Map Files for Volume Group/dev/vg00 */usr/sbin /vgexport-p-m/etc/lvmconf/vg00.mapfile/dev/vg00 * Creating C Ontrol Configuration. * Creating Archive File List * Creating Archive Configuration */opt/ignite/bin/make_arch_config-c/var/opt/ignite/recovery/2009-03-31,15: 48/archive_cfg-g/var/opt/ignite/recovery/2009-03-31,15: 48/flist-n 2009-03-31,15: 48-r 64-d Recovery \ Archive-t-I 1-m t * Saving the information about archive to/var/opt/ignite/recovery/previews * Creating The Tape ArchiveAdding/ op T/ignite/Version file to LIF.68203 + 0 records in68203 + 0 records out */opt/ignite/data/scripts/make_sys_image-c n-d/dev/rmt/0mn-t n-s local-n 2009-03-31,15: 48-m t-w/var/opt/ignite/recovery/2009-03-31,15: 48/recovery. log-u-R-g/var/opt/ignite/recovery/2009-03-31,15: 48/flist-a 21294420 * Preparing to create a system archive * Archiving contents of ggap1 via tar image to local device/dev/r Mt/0mn. * Creation of system archive completeNOTE: The following files are in the list of files that were on the system, but they are no longer present. these files are not supported Ded in the back-up:/opt/weblogic_ggdomain/core/var/opt/ignite/recovery/dobak.tar/var/tmp/ign_configure/make_sys_image.logNOTE: cocould not read the/etc/resolv. conf file. ======== 07/09/13 19:50:42 EAT make_tape_recovery co Mpleted successfully! III. the Tape recovery system places the Tape into the Tape drive, the installation disc into the optical drive, and the Tape recovery system. you need to use the installation disc Boot. in this step, select Boot from CD/DVD, Recover from Tape, then restore