Huawei AC Add AP configuration steps

The first step, prepare the table to install the AP location to operate

The second step, the placement of AP and Outdoor AP Template:
[AC] WLAN
[Ac-wlan-view] Ap-id 0 Ap-mac 60de-4476-e360 Add AP

third step, view download AP version update status
[Dxjw-ghzx_ac-wlan-ap-48]dis AP Up status All
------------------------------------------------------------------------------
Name Type AP MAC Update Status

Fourth step, name the AP and join the group
[Ac-wlan-ap-0]ap-name name (cannot be the same as an existing naming)
[ac-wlan-ap-0] Ap-group WiFi (included in WiFi group)
Warning:this operation maybe cause AP reset. If The country code changes, it'll Clear Channel,
Power and antenna gain Configurati
ONS of the radio, Whether to continue? [Y/n]y

Fifth Step, check the status of AP on line
After the AP is power up, when the Execute command display AP all checks to see that the AP's "State" field is "nor", that the AP is up and running. (This command distinguishes between different network segments to differentiate which group the AP belongs to)
[Ac-wlan-view] Display AP All
Total AP Information:
Nor:normal [4]

sixth step, automatically add AP
[Ac-wlan-view]ap-confirm All is applied under no-information conditions

Seventh Step, if the AP does not exist, execute the following command to delete the AP
[Ac-wlan-view]undo AP Ap-id 0 Remove APs with Ap-id as 0

eighth Step, AP description and RF tuning
[Ac-wlan-ap-0]ap-id 0 Ap-mac 7018-8bf7-00ab
[Ac-wlan-ap-0]ap-name 2-floor-301room
[ac-wlan-ap-0] Ap-group WiFi
Radio 0
Channel 20MHz 1
Radio 1
Channel 80MHz 149

Wireless Channels Follow the next chapter

Huawei AC Add AP configuration steps