Huawei Router Password recovery

Clear password method for medium and low-end routers
Clear bootrom Password:
In the low-end router bootrom default is not, if the settings are lost, can only use the Universal password: WhiteLily2970013
Note: Universal passwords are case sensitive
AR46 bootrom 5.04 Super Password: Supperman



1, the VRP 97 version, cannot eliminate the password, you need to upgrade to 2.0 version.
2. VRP 2.0 Version
1> the power-on self-Test press "Shift+d" to enter the download interface.
2> Type "*" After the password appears
3> type "shift+3", that is, enter "#".
3. vrp1.0 version
1> the power-on self-Test press "Ctrl+b" to enter the download interface.
2> After the password appears, type default is empty, enter can
3> type "Ctrl+p".
After you remove the password, you can enter privileged user mode for the first time, but after restarting, you are asked for the password. Where is the problem? The reason is that developers in the design, only consider to let you eliminate the password to enter once, to modify the password change, change the password command is an implicit command enable password, the first time after the change password and the disk, you can eliminate or modify the password you know.

Low-end Routers (25XX series, 25XXE series, 16XX Series, 4001/4001e) clear privileged passwords
Restart the router;
After you see the "Press Ctrl+b enter BootMenu" prompt message, press Ctrl+b to enter the BootMenu menu;
Press CTRL+P, the screen will show a few "#" and BootMenu menu;
Choose Reboot.
After the router restarts, press the ENTER key directly into the privileged mode, skip the entry of the privileged password, this time in the global configuration mode to enter the Enable password new password, you can change the privileged password to new password, It is important to note that the Enable password command should be written in full, otherwise the system will prompt that this is an incorrect command.

Mid-range Routers (262X series, 36XX series, 36XXE series, 263X series, 263XE series) Clear Privileged passwords
Restart the router;
After you see the "Press Ctrl+b enter BootMenu" prompt message, press Ctrl+b to enter the BootMenu menu;
Select Clear application password so that the next boot will not prompt for a privileged password;
Select Exit and reboot.
After the router restarts, press the ENTER key directly into the privileged mode, skip the entry of the privileged password, this time in the global configuration mode to enter the Enable password new password, you can change the privileged password to new password, It is important to note that the Enable password command should be written in full, otherwise the system will prompt that this is an incorrect command.
Note: The above bootrom version is generally 3.xx/4.xx
Low-end Router Clear Password method in new command line
The above is all for the old command line (similar to Cisco command line, such as show run, new command line refers to the version of DISP CU)
AR Router BOOTROM9.07 clear the console password:
Press Ctrl-b to enter Boot Menu
Please input bootrom password:

Boot Menu:
1:download application Program with XMODEM
2:download application Program with NET
3:set application file Type
4:display Applications in Flash
5:clear Application Password
6:start up and Ignore configuration
7:enter Debugging Environment
8:boot Rom Operation Menu
9:do not check the version of the software
A:exit and reboot
Enter your choice (1-a):
Select a to restart the router after selecting 5
BOOTROM9.06
Boot Menu:
1:download application Program with XMODEM
2:download application Program with NET
3:clear Application Password
4:start up and Ignore configuration
5:enter Debugging Environment
6:boot Rom Operation Menu
7:do not check the version of the software
8:exit and reboot
Enter your choice (1-8):
Select 3 and then select 8 to restart the router
BOOTROM7.06
Boot Menu:
1:download application Program with XMODEM
2:download application Program with NET

3:clear Application Password
4:start up and Ignore configuration
5:enter Debugging Environment
6:boot Rom Operation Menu
7:do not check the version of the software
8:exit and reboot
Enter your choice (1-8):
Select 3 to select 8 to restart the router

BOOTROM5.28
Press Ctrl-b to enter Boot Menu
Please input Boot ROM password:
Boot Menu:
1:download application Program with XMODEM
2:download application Program with NET
3:clear Configuration
4:start up and Ignore configuration
5:boot ROM Operation Menu
6:do not check the version of the software
7:exit and reboot
Enter your choice (1-7):
Select 3 to clear the configuration, select 4 to ignore the configuration to boot from factory settings
After the completion of the shipment, configure the router down and then change the password before importing
BOOTROM5.1
Press Ctrl-b to enter Boot Menu
Please input bootrom password:
Boot Menu:
1:download Application Program

2:download bootrom Program
3:modify bootrom Password
4:exit the Menu
5:reboot
Enter your choice (1-5):
Press ctrl+p and then select 5来 Clear Password


Ignore configure clear Password and import configuration steps
1. Reconfigure the router's Ethernet port address
[Router-ethernet1]ip address 192.168.10.1 255.255.255.0
2. Ensure that the Ethernet port of PC and router can be exchanged
3. Configure an FTP account on the router to configure down from the PC
[Router]local-user ftp Password sim ftp ftp-directory flash:/
4. Start the FTP service on the router
[Router]ftp-server Enable
4. Enter CMD in the PC's running bar
FTP 192.168.10.1
Enter User name FTP password FTP
Hash
LCD c \ Specify the profile directory after download
Get config
Then open the change password with a notebook or notepad and put it on.
Note: You do not need to save the configuration after uploading, if the save configuration, the uploaded configuration will be overwritten.
Summary: Bootrom 5.28/7.03/7.05/7.06/9.03/9.05/9.06/9.07 Clear the password is basically the same way, is clear application password or Start up and ignore Configuration
Bootrom 5.1 Clear Password is press Ctrl+p