The following is the author of the video course of a PPT course content, introduces the Huawei VRP System user Interface main configuration method, and a real Telnet remote login experiment to verify the correctness of these configurations. The video links for this course are as follows ( free to watch ): http://edu.51cto.com/lesson/id-22512.html
First, the VRP user interface configuration steps
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/31/04/wKioL1OqFj7QibNEAAKvwHg7qTk974.jpg "title=" 4.png " alt= "Wkiol1oqfj7qibneaakvwhg7qtk974.jpg"/> Two, Telnet login experiment
When the device is first logged on through the console port, the next Telnet switch is configured for the user:
? Configure IP Address: 192.168.137.10/24, client IP address is 192.168.137.1/24
? using vty 0~4 route
Certification method for AAA Certification
The authentication user name is Winda and the password is Huawei
The user level after login is 15
? To prevent illegal logons, restrict only the current PC to allow Telnet to log on to the switch
Using the Huawei ENSP 2.0 version of the "cloud" device to build the following experimental environment, the switch in the simulator and the local physical PC is located in the network mapping.
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/31/05/wKiom1OqFpKjnkPXAABB2KDJpEQ122.jpg "title=" 2.png " alt= "Wkiom1oqfpkjnkpxaabb2kdjpeq122.jpg"/>
1. Configure the Telnet IP address
? Configure IP address with management port
In addition to the S1700/2700 series in the Huawei S-series switches, the other series provides management interfaces
<HuaweiI> System-view
[Huawei] sysname Server
[Server] Interface meth 0/0/1
[SERVER-METH0/0/1] IP address 192.168.137.10 24
[SERVER-METH0/0/1] Quit
? Configure IP addresses with VLAN interfaces
[Server] Interface Vlan1
[SERVER-VLANIF1] IP address 192.168.137.10 24
[SERVER-VLANIF1] Quit
2. Enable the Telnet Server feature and configure the relevant login properties
[Server] Telnet Server enable
[Server] user-interface vty 0 4
[server-ui-vty0-4] User Privilege level 13
[Server-ui-vty0-4] Authentication-mode AAA
[Server-ui-vty0-4] Quit
[Server] AAA
[SERVER-AAA] local-user winda password cipher Huawei
[SERVER-AAA] Local-user Winda Privilege level 15
[SERVER-AAA] local-user Winda service-type telnet
[SERVER-AAA] Quit
3. Restrict Illegal Login
[Server] ACL 2001
[server-acl-basic-2001] Rule permit source 192.168.137.1 0
[server-acl-basic-2001] Quit
[Server] user-interface vty 0 4
[Server-ui-vty0-4] ACL 2001 Inbound
4. Perform a telnet login
After you perform Telnet 192.168.137.10 on the PC, enter the username and password in the login window, and you will be prompted after the verification is passed.
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/31/04/wKioL1OqFovDd5NIAAGfh24yCZw358.jpg "title=" 1.png " alt= "Wkiol1oqfovdd5niaagfh24yczw358.jpg"/>
For more information about my video course, see my Video Course homepage: http://edu.51cto.com/pack/view/id-3.html
Lifetime membership, lifetime service, join the public account "Talmai King Geshur Big lecture Hall"Learn more
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/31/05/wKiom1OqFtnjhOPaAABi33QEAiM031.jpg "title=" QR code. png "alt=" wkiom1oqftnjhopaaabi33qeaim031.jpg "/>
This article is from the "Talmai King Geshur Blog" blog, please be sure to keep this source http://winda.blog.51cto.com/55153/1430561