Huawei hg1_5 Optical Fiber cat route settings

I. Question proposal:

Now the broadband access of China Telecom has changed. The infrastructure construction is fiber-optic, and fiber cables are dug everywhere. In communities with fiber-optic cables, telephone signals are also fiber-optic, therefore, the ADSL provided by China Telecom was replaced by the Huawei hg1_5 Optical Fiber cat router, which has two transmission columns. After the optical fiber is connected to the optical fiber port of the router, generally, China Telecom allocates the router parameters to end users. Users only need to push the network line to the router's network port, and the telephone line to the router's phone port, you can call the vro to access the Internet.

However, China Telecom wants an account to allow multiple computers in the home to access the Internet. China's national law prohibits telecom operators from imposing hardware restrictions on Household broadband, therefore, we can buy a wireless router to achieve wireless Internet access. Even if China Telecom secretly blocks this wireless router after a period of time, users only need to change the wireless router to continue accessing the Internet on multiple computers at the same time, now, I am dumb. I complained on the phone no. 10000 and asked me to help you set up the Huawei device at home. I needed wireless Internet access. As a result, the younger siblings sent by China Telecom were dumb and won't set it, just make a fool that you can set it as needed to access the Internet wirelessly, but he just doesn't set it. What should I do?

Ii. Problem Analysis:

Huawei hg1_5 Optical Fiber cat router is made by Huawei. Huawei pays attention to knowledge and money. Huawei's three-tier Switch Equipment should train a group of technical personnel, the training of these technicians is not free, and they need to pay for their own courses. If these technicians are employed by Huawei, the field fee for going out to set up switches is high, ranging from 3000 to 5000 at a time. Therefore, no specification is provided for the configuration of the Huawei hg1_5 Optical Fiber cat router. Huawei devices like to use Telnet to establish connections to devices, obtain basic information, and perform specific settings on devices. These settings are hidden in depth, if you do not know the meaning and usage of commands, it means that if you use Telnet, it is also empty. Then we provide an IE interface for you to make some surface settings, but these settings also have limitations. Since the Huawei hg1_5 Optical Fiber cat router is deprecated to end users, it will not be so powerful, it will always give users the freedom to play, even if users do not understand, it can also be used by carriers.

Iii. Problem Solving:

Set the Huawei hg1_5 Optical Fiber cat router in two steps:

Step 1: Enter the command prompt interface, enter Telnet 192.168.100.1 and press Enter. When login: is displayed, enter root and press Enter. When password: is displayed, enter Admin and press enter to see WAP. Then, enter 【Get Port Config portid 1] And press Enter. The device information we want to obtain is displayed. For example:

[Port Config info: Enable = 1 MTU = 2000)Portvid = 3333Portpri = 0Negomode = 1 speed = 1 duplex = 1 link = 1 pauseen = 0 pauseline = 64 loopmode = 0 mirroren = 0 dstport = 4 mirrortype = 0]

All we need to do isPortvid = 3333Portpri = 0.

Step 2: Go to the IE page and set the settings.

1. Set the IP address of the computer to 192.168.100.2, The subnet mask to 255.255.255.0, and the gateway to 192.168.100.1.

2. Enter 192.168.100.1 in IE, set the logon username to telecomadmin, set the password to admintelecom, set the language to Chinese, and then login.

Entry location 【 Lan ] → 【 Lan Port mode] , Hook up lan1, lan2, lan3, click "application", and lan4 is empty. If the port lan4 left behind by IPTV is activated, it will be used. If all the ports are checked, the activated IPTV cannot watch TV.

enter [ LAN ] → [ DHCP service configuration] enables DHCP for the master server, DHCP relay, and IP address 192.168.100.2, the ending IP address is 192.168.100.254.

enter [ Wi-Fi ] → [ Wi-Fi basic configuration] , create a new one, SSID = receivweinet, number of connected devices = 32, authentication mode = wpapre-sharedkey, encryption mode = TKIP, WPA Public Key = self-set 8-63 characters.

enter [ Wan ] → [ Wan Configuration] , you can see a voip_r_vid_998 list and related information. Do not delete it. This is used to link the phone signal. Keep it. There is a new one on the list. Click "new, after the creation is pressed, a page is displayed for us to set:

【WanThe enable check box on the edge of connection must be checked to ensure Internet access.

【 Service list ] : Select"Internet"
【 Connection Method ] : Route
【 VLAN ID ] : 3333 (the value you just noted down is used)Value Source:【 Portvid = 3333 ]
【 802.1 p ] :0Value Source:【 Portpri = 0 ]

【 ObtainIPMethod ] :Pppoe
【 Nat ] : Enable check box checked
【 User Name ] :Dial-up Internet access account 【 Password ] :Dial-up Internet password

【 Bind item ] :LAN1-LAN3, ssid1.All checked,LeftLan4Not checked.

Click application.

enter [System Tools] → [ profiles : Click Save configuration to write the configuration to the vro for constant value.

Entry location[Status]→ 【WAN Information]To view the status. When you see the following in the list:

1_voip_r_vid_998 is in connected status,

When the status of 2_internet_r_vid_3333 is connected, the router implements the routing function. We can detect the Wi-Fi signal sent by this router through mobile phones and laptops to connect to the Internet, of course, the three ports lan1, lan2, and lan3 are connected to a computer with a wired Nic, and the network can also be routed to the Internet.

The vro settings are complete.