Huawei hg8347r v3r016c10s135 Bridge to connect with Beijing Unicom to restore Huawei original

Background

17 Transact the Unicom 100M fiber, give the light cat is Huawei hg8347r (Optical cat route model for Huawei Hg8347r, software version for v3r016c10s135), say that the light cat can still fully meet the small area of the family use.

With WiFi, the configuration is convenient and no additional wireless routers are required.

1. If it is necessary to meet the characteristics of long-term stability, high-performance operation; Due to the design defects of hg8347r hardware, the penetration force of the WiFi is poor first, put in the electric box and close the iron gate, the speed attenuation is more than 50%, let alone a wall, or a few rooms.

I would prefer it (Huawei hg8347r) to be used alone as a fiber-optic cat, instead of giving the dial-up function to a more professional router.

2. You can increase the load and upload bandwidth of the download bandwidth by double dialing or multiple dialing.

Let's talk about how to re-elevate the "castrated" hg8347r to its original function:

Ideas

1. Change hg8347r to original Huawei configuration

2. After uploading the decrypted hw_ctree.xml, modify the Internet to connect to the bridge

3. Configure the router (multiple WANs can be used) and PPPoE multi-dial.

Specific process

Specific I will not be reproduced, the network of information a lot.

and different versions may have differences, flexible response, usually within a few hours should be able to handle.

Thanks for the link:

Beijing unicom Huawei Hg8347r cracked http://www.chinadsl.net/forum.php?mod=viewthread&tid=128938&extra=&page=1

Beijing Unicom Light Cat problem https://www.v2ex.com/t/362416

[Forward] Huawei hg8346r open telnet and restore Huawei Mode tutorial http://guanggai.org/thread-452-1-1.html (with tools)

Difficult

1. The tool "Huawei Optical cat profile encryption tool. exe" decrypted and extracted after the hw_ctree.xml, according to the revised tutorial can not be successfully imported into the original hg8347r Huawei?

Even if the interface reality has been successfully imported, the configuration file is not imported at all. To solve this problem, we need to pay close attention to the message of the post. The right solution:

The decrypted and extracted hw_ctree.xml are directly imported into Huawei's original web interface system.

2. To be able to surf the internet, the telephone is normal, IPTV cannot watch TV, note: Unable to connect to the IPTV platform, please call 10010.

This problem bothered me for a few hours, in fact, modified to be able to bridge and normal Internet after the most of the setup work has been completed. The correct approach is to:

Web Wan Wan Configuration 4_iptv_r_vid_3964 binding: "LAN4 save.

3. If your computer does not have a physical network interface, you should take more steps.

Yes, I set these up through the laptop, only WiFi, no network cable directly connected. Skills:

In some cases, you can connect directly to the HG8347R's own Wi-Fi interface,

Sometimes (because the light cat's WiFi is turned off), you need to connect the light cat to the LAN port of the router, and then manually modify the notebook's IP to connect to the 192.168.100.1

Huawei hg8347r v3r016c10s135 Bridge to connect with Beijing Unicom to restore Huawei original