Huawei mt800 route upgrade supplement strategy!

Huawei mt800 route upgrade supplement strategy!

Statement: This article needs to be read by people with network basics.

Basically, set the local machine to 192.168.1.2/255.255.255.0, enable http: // 192.168.1.1 in IE, and then configure it.

Mt800 models are too messy. I have seen at least 6 models:
V100r001 ...... (Not in Shijiazhuang)
V100r002 ...... (Supports Routing)
V100r003 ...... (Provided by Shijiazhuang Netcom)
V100r004 ...... (Supports Routing)
V100r005 ...... (Provided by Shijiazhuang Netcom)
V200r001 ...... (Not in Shijiazhuang)

That is to say, Shijiazhuang Netcom provides two kinds of mt800 (I have only seen two types), one is v100r003 ......, Another v100r005. Pay attention to the flash, 003 of the flash 002 firmware, 005 of the flash 004. Therefore, you must check the current version on the Web management interface before upgrading.

In version 005, Huawei has made some effort and you cannot directly upgrade it through the Web management interface. Otherwise, the firmware file is always prompted, which is true. Believe in yourself.
For version 005, upgrade as follows:
(1) back up the original firmware:
Enter the DOS prompt and go to c.
C: \> FTP 192.168.1.1
Enter the user name and password (admin/admin)
Run the get teimage. Bin command. Later, the teimage. BIN file will be generated under c: \. This is the backup of firmware.
(2) upgrade firmware:
Rename the upgrade file teimage. Bin and copy it to c: \.
Enter the DOS prompt and go to c.
C: \> FTP 192.168.1.1
Enter the user name and password (admin/admin)
Then, use put teimage. bin to upload the new firmware version. At this time, please pray not to lose power... (This process is longer than the backup time)
The modem will be restarted after completion.
There is a reset key behind the modem. Press it three times, and then the modem indicator will be fully on. At this time, the modem will be reset.
Disable the local Nic, enable it, and refresh the network configuration.
Now, Use http: // 192.168.1.1 to configure the route!

ArticleInput: Admin responsible editor: Admin