Huawei Switches
Trunk port changed to access
Undo Port Trunk Allow-pass VLAN All
Port Trunk Allow-pass VLAN 1
Port Link-type Access
Port default VLAN 100
Multiple ports join the same VLAN
[Quidway]port-group upto!! Port Group Name
[Quidway-port-group-upto]group-member gigabitethernet 0/0/1 to Gigabitethernet 0/0/10
[Quidway-port-group-upto]port Link-type ACC
[Quidway-port-group-upto]port Default VLAN 10
[Quidway-port-group-upto]quit
DHCP Relay
<Quidway> System-view
DHCP enable to turn on the DHCP service of the switch
Then go to virtual VLAN view
[Quidway]interface vlanif 100
Then start the DHCP relay feature
[QUIDWAY-VLANIF100]DHCP Select Relay
Configuring the DHCP server IP address
[Quidway-vlanif100]ip Relay Address 10.10.100.171
Switch resource query:
Dis int brief This can see the port occupancy rate
dis int G0/0/1 View interface information, shifting interface flow!
The Display cpu-usage command is used to view statistics and configuration information about CPU usage
DELL switch
Show processes CPU shows average CPU usage for 5 seconds, 1 minutes, 5 minutes
This article is from the "it--Refueling" blog, please be sure to keep this source http://x3300945.blog.51cto.com/3010132/1871804
Huawei S5700 Switch Common Configuration command-----not complete