Huawei S5700s-28p-li Console Connected computer

Before you configure the switch, you need to connect the switch to your computer, and the following is a detailed explanation of Huawei S5700s-28p-li connected computer

First, go to download a Huawei console driver: Download

Then, with the configuration line, a RJ45 interface connected to the switch console port,

650) this.width=650; "src=" Http://s4.51cto.com/wyfs02/M02/7F/47/wKioL1cYqNDAH594AAHHyBCsrkc068.png "style=" float: none; "title=" 11.png "alt=" Wkiol1cyqndah594aahhybcsrkc068.png "/>

The other end is connected to the computer host COM port,

650) this.width=650; "src=" Http://s2.51cto.com/wyfs02/M01/7F/47/wKioL1cYqNOxvdeVAAF_EkSK2Ms850.png "style=" float: none; "title=" 22.png "alt=" Wkiol1cyqnoxvdevaaf_eksk2ms850.png "/>

On your computer, install a SecureCRT ,

650) this.width=650; "src=" Http://s4.51cto.com/wyfs02/M00/7F/49/wKiom1cYqBGhAPdiAAALHrEQVqw798.png "style=" float: none; "title=" 33.png "alt=" Wkiom1cyqbghapdiaaalhreqvqw798.png "/>

Then, open computer-administration-Device Manager, and look at the connected COM interfaces.

650) this.width=650; "src=" Http://s4.51cto.com/wyfs02/M02/7F/47/wKioL1cYqNPihLsAAABWv68dJt8837.png "style=" float: none; "title=" 44.png "alt=" Wkiol1cyqnpihlsaaabwv68djt8837.png "/>

Finally, open SecureCRT in quick Connect and select "Serial" for detailed settings.

650) this.width=650; "src=" Http://s2.51cto.com/wyfs02/M01/7F/49/wKiom1cYqBKRctmUAABCGxMoVvs273.png "style=" float: none; "title=" 55.png "alt=" Wkiom1cyqbkrctmuaabcgxmovvs273.png "/>

Note: Please strictly follow the diagram to set, do not check any parameters

After Setup is complete, Connect

650) this.width=650; "src=" Http://s2.51cto.com/wyfs02/M00/7F/47/wKioL1cYqNTAkOUrAAA7z8l-FQE774.png "style=" float: none; "title=" 66.png "alt=" Wkiol1cyqntakouraaa7z8l-fqe774.png "/>

This article is from the "Aixe" blog, make sure to keep this source http://aixecc.blog.51cto.com/3931677/1766349

Huawei S5700s-28p-li Console Connected computer