Huawei smart mt880 ADSL modem route sharing Internet Configuration

A long time ago, today I have organized my computer and shared my previous experiences.
@ 2007-1-21
Finally, shared Internet access is completed.
There are many ways to configure routes on the Internet, but it is really difficult to find a suitable method.
The value of VPI and VCI is hard to determine.
Inspired by a post on mop02 configuration, I thought of how to view VPI and VCI.
He connects two machines to the hub at the same time, and one of them is dial-up. At this time, ADSL is the default configuration.
Then another host accesses 192.168.1.1 to check that the connection is successful.
But this method won't work for me.
However, I can see which configuration is disabled to make the network unavailable.
Works with Xiaoye's machine
We finally found that the pvc4 or 8/81 combination is the correct configuration (different regions have different numbers)
So we disable all unused PVCs and configure this route entry and automatic dialing.
Configure DHCP server
The ADSL link status light turns orange after the ADSL restart, indicating that the built-in dialing is successful.
Yeeh!
Now, you only need to set the gateway of my portal to 192.168.1.1 and you will be able to access the Internet freely.
End
Add: Because cazy's Old Thunder hurt the hard disk too much, so I tried to install a utility yesterday, but I encountered another problem.
Port ing issues. I found it online.
Leave him alone. If anyone sees a solution, leave a link here and I would be very grateful ^