Connect to the Internet using a wireless router at home. Other devices (such as computers) connect to the router through a network cable or directly connect to the wireless signal of the router to access the Internet. At this time, the TP mini can also connect to the wireless signal to access the Internet.
The following describes how to set up wireless access for TP mini.
1. Open the Settings page.
Go to the main interface of TP mini with big eyes and open "settings ".
2. Enable Wi-Fi
Make sure that "Ethernet" and "wireless route" are disabled. If it is enabled, disable it.
Hook up Wi-Fi.
After you hook up Wi-Fi, the system prompts "enabling Wi-Fi ".
After Wi-Fi is enabled, the "Wi-Fi" function item will display "open". On the right side of the Wi-Fi settings page, you will see wireless signals found nearby.
3. Connect wireless signals
Find the desired wireless signal in the displayed wireless signal and Click Connect.
After you click the wireless signal, the page will prompt you to enter the password and click the password input box.
Enter the wireless signal password and click "connect ".
At this time, the TP mini is connected to a wireless signal.
When the wireless signal connection is complete, "connected" is displayed ".
At this point, TP mini is successfully connected to the wireless signal access network.