Illustration of use of the pusang lighting button (road test vehicle)

Source: Internet
Author: User

Due to typographical problems, not very suitable for reading, you can see http://www.jb51.net/diy/pslk.htm
Poussin has two lighting switches,
In the first position, only the taillights are turned on, that is, the indicator lights, the small headlights, and the indicator lights on the dashboard.
The headlight is opened at the second position. Only the second position can be switched between the distance and the near light. When the light switch is not turned on, you can also turn on the high light. The light on the left side of the steering wheel can be opened by dialing the lever near the steering wheel, but it will be automatically closed when you release it. The dial is the right turn lamp up and the left turn lamp down. The anti-fog light switch is under the central control panel. The icon is a diagonal line with three lines in front of a light. Similarly, the first-shift anti-fog light is enabled at the same time.
The headlight is the two headlights in front. The remote light is switched to the headlight. The remote light or near light can be changed through the left-hand Switch handle (the upper and lower positions of the light assembly. Close-to-light is used for lighting less than 100 meters, and remote light is used for lighting more than 100 meters. close-to-light is used for cars, cars in front, and cities.
The indicator lights and the rear lights indicate the width of the car and tell other cars how many places they should leave for you. The indicator light is usually two small lights next to the headlamp. It depends on the outside and is mounted on the front. The rear light is generally a lamp with the brake light, but the light will be brighter than the non-brake light when it is braked, obviously this is installed in the back. Turn on the near light or high light, the indicator light, the rear light, and the indicator light are on.
Poussin also has different models. Some models can be turned on separately (display lamps, rear lamps, and dashboard lamps), and headers (near-light and far-light) are turned off.

Note: The diagram is in Santana's instruction manual, but it is not the model we use for training. But the introduction information in it is a good description.

Diagram of combined instruments and indicator lights:


The headlight is switched on and off on the left of the steering wheel! Flat is a small light, press down is a headlight, light is the left of the steering wheel of the rod control, dial to your own direction is light! Turn on the fog light!

If you cannot change the distance, your controller is broken. If you turn on the fog light, you do not need to turn the headlight to the end. If you press it to flatten it, you need to turn on the light, the lights on the colleague's dashboard will be on. Fog light on (99 rookie pusang) should be a key control under the CD tool ~

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.