To give you illustrator software users to detailed analysis to share the color mixing function of the production of color disc effect map Tutorial.
The gorgeous disc has a good effect, making it not complicated. Let's start now!
Using the line tool, [shift]+ the mouse to draw a straight line.]
When the line is selected, select the tool bar's rotation tool. Usually the center of rotation will default to the center of the object.
Move the center of rotation to the end of the line.
Note: The angle of the information Panel is observed on the one hand. On the other hand, press and hold (alt)+ mouse to drag, rotate angle. The ALT function is to help edge-copy edge rotation.
When you rotate to 60 degrees, loosen [Alt] and mouse, and then type (ctrl+d) to copy the above action.
Repeat (ctrl+d) until six lines are formed.
Choose a different color for the six line.
Select the Blending tool in the toolbar, close to it with a straight line, until the end of the tool mouse appears with an "X".
As shown in the figure, clicking a line does not have any effect.
Then the mouse is next to the next line, until the end of the tool appears with "+", and then the line is clicked again. Colors produce gradients.
Do not stop after the gradient, continue close to the adjacent line and click it, in turn, will appear in the picture above.
When you click to the original line, a small circle appears at the end of the tool, which means it's closed.
Narrow observation, feel good. Note: If you do not form a as follows gradient color mix, it means that your blending tool initial state is not a smooth color. How to adjust the parameters? The blending Options panel appears when you double-click the toolbar's mixer button.
Change the spacing in the panel to the specified step: 5 Steps, the screen will appear between two lines 5 lines.
If you choose a specified distance: 1.41mm, the distance between these joined lines is 1.41mm.
This effect occurs if you turn the direction into a alignment path.
The effect we need is only when the parameter chooses to smooth the color. After the correction, click OK to continue our subsequent operation.
Make an elliptical shape with an elliptical tool.
Select the ellipse, right-click on the page, select Transform > Zoom in the Menu
Zoom size to 20% and click the Copy button.
After forming two concentric circles, click the button in the path picker as shown above, and two concentric circles become a circle.
Fills the color and expands the contour. (In the path-finding device, the dot extension button is the path complete, removing the redundant stationary point)
Move the ring to the original tapered hexagonal shape. Align them.
At this point, we need to type [ctrl+7] and make a template. The resulting template is the gradient ring section.
Make one of the same rings and fill in the darker colors.
Overlay them, creating a shadow that makes the disc graphic complete.
The final effect will come out. Relen the color gradient of the disc surface in this picture is different and has slight adjustment. You can have different colors at the beginning of the blending line, and the consistent final gradient will be different. You can also make adjustments after the production, adjust the way we will mention later. Second, elegant effect
Before making a compact disc disc, Relen didn't expect to have such an effect. Produced, only to find that feeling good. In fact, we should be bold to try some not tried the production method, or interesting operation, groping, may appear unexpected graphics, patterns Oh!
Use the Ellipse tool to draw a positive circle as shown in the figure. Don't forget to put your left hand down [Shift] Oh.
Select the Circle, right-click on the screen, select Menu Transform > Zoom
As shown in the figure, zoom 30%, pay attention to the click (Copy) button, so as to reproduce a prototype 30% concentric small circle.
Duplicate the effect of the circle, with the largest circle as the prototype, again copying a circle out. As shown in the picture, a new prototype is a small circle of 40%.
It is not over yet, with the largest circle as the prototype, the last copy of a prototype 11% small circle. See, that's the disc.
Coloring is a very important step, the color should be elegant, follow relen together tonal.
Note that after good color, you want to remove the stroke effect. It will feel better.
Using the line tool, [Shift] with the mouse and dragging, pull out a straight line.
Place the line in the middle of the disc, and be careful to make them overlap the center of the circle. At this point, select the line and use the Rotation tool, as shown in the diagram.
To make the rotation panel appear, double-click the button position on the tool bar's rotation tool. When you double-click, the Rotate button appears. Enter 5 degrees in the angle value. and select the Copy button. After copying a 5-degree line, repeat and press [Ctrl+d]. The following figure effect appears.
Do not copy too much. There are a few on it. Then you need to select them individually and give them different colors.
As shown, you can try a few more colors, and finally you can adjust.
Color blending is done below to select the Blending tool in the toolbar. This is an easy to operate tool, do not need to select any object, when you close to one of the lines, at the end of the tool will appear a small "+". At this point, you can click the line. After clicking, there may not be any changes, which requires you to put your mouse near the adjacent line, and then click once. After two clicks, the color produces a gradient.
Relen remind readers that when you do this, click them in one direction, in order, click the outer line first, click the adjacent line, and then continue to the adjacent line until the edge of the other side.
As shown in figure, this is the effect of completion. This effect, does not let us meet. In fact, this is half done, and ultimately the need for color adjustment. Until we are satisfied with the position.
It takes patience to adjust the color and enlarge the image. Use the white Arrow tool. Click on the screen to find the line where you want to change the color. This may take some skill, and you may click it most of the time, and you will select all the lines, and you want to click on them very close to where you are, until they are finally clicked.
This is the Green Line just now, and relen it into a light yellow one. And the dark Purple Line next to the original Green line turns gray. Look, as long as you are careful, it is not difficult.
Select the lines you have adjusted, and select the (multiply) in the menu (transparent panel) to show the effect shown above. If you can't find the transparency panel, you can type [SHIFT+F10]. At this point, the line color and the disc outline is soft together, this is the same as Photoshop layer overlay effect of the tool, in illustrator often used.
Copy a few more mixed color lines and rotate them on the disc. The color is too intensified and not good-looking. For a more perfect effect, continue to use the White Arrow tool and select a straight line for color adjustment on the bottom of the multiply-stacked line. As above, this is already the relen adjustment to the late effect, at this time feel good. Move the purple circle to the layer where the line is located, and the final effect of the disc is almost complete.
OK, this is Relen made a simple and elegant plate. It feels good!
Select the completed single disk to be indented. Select the Zoom tool for the toolbar. Note adjust the compression ratio.
Copy a bottom, make shadow effect, three-dimensional one comes out, look more to disc!
Replace the purple Circle, change it for other such as blue, green, so that the disc group to enrich a lot! Relen remind completely follow this article to make the CD-ROM friends, do not complete with the Relen made, you can adjust the color of the disk. Different colors, painting style will also be different.
Well, the above information is small to give you illustrator of this software users of the detailed color mixing function of the production of color CD-ROM effect of the tutorial to share the whole content, you see the users here, small knitting believe that you see here now is very clear the method of drawing , then everyone go to follow the tutorial to draw their own.
