To give you illustrator software users to detailed analysis to share the creation of delicate exquisite colorful windmill painting tutorial.
First, create a new document, set the grid
Press CTRL + N to create a new document. Unit selection is pixel, width is 600px; height is 750px, then click the Advanced button to set the color mode to: RGB, grid effect is: screen (72ppi), and make sure that the new object and pixel grid alignment box is not selected, and then click OK.
Enable the grid (View > Display grid) and Snap to Grid (View > Snap to Grid). For starters, you'll need each grid to be 5px, to edit > Preferences > Guides and grids, set grid line spacing to 5px and the secondary divider line to 1. It will lighten your work by CTRL + "You can easily enable or disable the grid."
You should also open the Info Panel (Window > info) to preview the shape's size and position in real time. Don't forget to edit > Preferences > Units, the General option is set to pixels. All of these options will significantly increase your productivity.
Two, create two main shapes
The named Layer 1 is "orange". Select the Rectangle tool (M). On the toolbar, remove the stroke color and set the fill color to r = 255,g = 167, B = 0. Creates a rectangle with a 135-pixel x55 pixel, and the alignment to the grid works. Select the anchor point in the upper-right corner with the direct selection tool (A). Move it 55 pixels to the left.
2 ways to change the fillet radian:
Method 1: Keep the moving anchor point in the selected state, in the Control Panel, enter 24PX in the rounded corner box. This feature is available only for CC users.
Method 2: Another way to replace this effect is to use the plugin "Round any Corner": micro-Disk Download
Save it to the computer, return to the AI select the Direct selection tool (A). Select anchor points and go to files > scripts > Other scripts. Open the script, enter a 24PX radius, and click OK. The end result may look a little different.
On the orange shape, make sure to stop at the direct selection tool (A). Select the anchor point to the left and set the fillet radius to 30 pixels. Using the selection tool (V), select your entire shape and go to the effect > Warp > Arc. Go to the properties shown in the following illustration, click OK, and then go to the object > expand Appearance.
Let the orange shape remain selected, to Effect > Warp > Arc. Go to the properties shown in the following illustration, click OK, and then go to the object > expand Appearance. form the bottom shape. Then switch to the direct selection tool (A). Select the anchor point in the lower right corner and set the fillet radius to 3px. Now your shape should be the third figure.
New layer, named "Yellow", sets the fill color to r = 255,g = 194 B = 53, selects the Rectangle tool (M), creates a 70x55 pixel shape, and places it on top. Select the yellow rectangle, switch to the Delete Anchor Point Tool (–), and remove the anchor point in the lower-right corner. Then your yellow moment forms a triangle, as shown in the picture.
Select the yellow rectangle to effect > Warp > Arch. Go to the properties shown in the following figure, click OK, and then go to the effect > Warp > Arc. Go to the properties shown in the following illustration, click OK, and then go to the object > expand Appearance.
With the direct selection tool (A), select the anchor point in the upper left corner and set the fillet radius to 10px.
Disable Snap to Grid (View > Snap to Grid), and turn on Smart Guides (ctrl+u). Create a new layer, named "Path", using the Pen tool (P), roughly creating a simple path, such as the black shape of the first image in the figure. Select the orange shape, use CTRL + C (copy), and Ctrl+f (in-place) on the front-painted path panel. Choose Orange shape, right click, Arrange > put on bottom. On the path layer, select the orange and black shapes, open the Pathfinder Panel (Window > Pathfinder), and click the Intersect button, as shown in Figure three. Now turn off the smart Guides (ctrl+u).
Then select the yellow shape and press shift+ctrl+ to place it at the top level. Select both the yellow and black shapes, and then click the Union button in the Pathfinder panel.
Select the yellow shape and copy (Ctrl-c), and then paste (ctrl+f) on the orange layer. On the orange layer, select the yellow shape copy and orange shape, and then click the Path Finder panel to subtract the top button. The shape now looks like figure two.
Third, add color and light sense
Go to Edit > Preferences > General, and the keyboard increment is set to 1 pixels. Select the orange shape and copy two copies in situ (CTRL+C>CTRL+F>CTRL+F). Select the top copy and use the arrow keys to move down 1px and right to 1px.
Select the two shapes you copied in this step, and then click the Path Finder panel to subtract the top button. Select the resulting shape on the appearance panel, set the fill color to black (R =0,g =0, B =0), and then tap opacity to eject the transparency panel. Reduce the opacity to 25%, changing the blending mode to soft light.
Re-select the orange shape and copy two copies in situ (CTRL+C>CTRL+F>CTRL+F). Select the top copy and use the arrow keys to move Down 3px and right to 5px. Select the two shapes you copied in this step, and then click the Path Finder panel to subtract the top button.
Select the resulting shape on the appearance panel, set the fill color to black (R =0,g =0, B =0), and then tap opacity to eject the transparency panel. Reduce the opacity to 10%, changing the blending mode to soft light.
Re-select the orange shape and copy a copy (ctrl+c>ctrl+f>ctrl+f). Select this copy and go to the object > Transform > Rotate. Set the angle to 5 degrees, and then click the Copy button. Make sure that the newly created shape is selected and moves down by 5 pixels and 5 pixels to the right.
Select the two shapes you copied in this step, and then click the Path Finder panel to subtract the top button. Select the generated shape on the appearance panel, set the fill color to black (R =0,g =0, B =0), and then tap opacity to eject the transparency panel. Reduce the opacity to 5%, changing the blending mode to soft light.
Re-select the orange shape, and then go to the object > Path > Offset path. Enter the -1px offset and click OK. Select the new shape to copy a new shape (ctrl+c>ctrl+f).
Select the shape to copy and move it 1 pixels. Select the two shapes you made in this step, and then click the Path Finder panel to subtract the top button. Change the fill color to the shape of the linear gradient shown in Figure 3 below, and reduce its opacity to 70%. The yellow number represents the percentage of transparency.
Re-select your orange shape in the Appearance panel and add a linear gradient using the Add new Fill button. As shown in Figure 1. Note: The yellow number represents the percentage of transparency, and the blue number "50" represents the percentage of the position.
Then continue to add the linear gradient, as shown in Figure 2, and reduce its opacity to 30%.
Select the yellow shape and copy it two layers (ctrl+c>ctrl+f) at the current location. Select the first layer of the copied shape and move it up and to the left 1 pixels. Then select both to copy to the shape, and click the Path Finder panel to subtract the top button. Make sure the resulting shape is selected, change its blending mode to soft light, and add the gradient as shown in Figure 2.
Select the yellow shape and copy the first two copies (Control+c > Control+f > Control+f). Select the top copy shape to move it to the right 2px. Re-select the two copies copied in this step, and click the Path Finder panel to subtract the top button. Make sure the resulting shape is selected, reduce its opacity to 50%, change the blending mode to soft light, and add the gradient as shown in Figure 2.
With the yellow shape selected, the fill color is changed to the gradient shown in Figure 1. Then select all the shape groups (ctrl+g)
Four, add the wind blades, recolor
Select your grouping, go to effect > distort and Transform > transform. Go to the properties shown in the following illustration (don't forget to check the left reference point at the bottom), and then click OK. Then go to object > expand appearance. Make sure that the shapes within the group are selected, simply click Ctrl+g to ungroup them. On the layers panel, you will find four separate groups.
Select the group of the propeller on the right, and change the gradient of its corresponding layer to the following figure
Select the group of the propeller on the left, and change the gradient of its corresponding layer to the following figure
Reminder: The RGB value here is wrong, the students choose their own red can.
Select the group of the top propeller to change the gradient of its corresponding layer to the following figure
Select a few shape groups, copy one layer (CTRL+C>CTRL+F), and turn it to the top level (shift-control+[). Select the Blue Propeller Group and click the Union button in the Pathfinder panel. Fill the resulting new shape with white and place it on the top (shift-control+])
Select the white shape and the yellow shape to open the Transparency Panel (window > Transparency) and simply set the Make Mask button.
Select all the shapes that have been made to date, go to object > Transform > Rotate. Enter the 45-degree angle, and then click OK.
Five, the production of wooden sticks
Enable grid alignment (View > Snap to Grid). Select the Rectangle tool (M) to create a 10x200px shape, filled with brown, as shown in the following figure. Select the rectangle to effect the style > rounded corners. Set the radius of the 2px, after determining. To the effect of "deformation > arc". Set the values as shown in the figure below to determine the object > expand Appearance.
Select the Rectangle tool, set its fill to a linear gradient as shown in the figure below, and press shift+control+[to place it on the bottom.
Select the rectangle shape, and add a second fill in the skin panel using the Add New Fill button. Select a new fill, reduce its opacity to 70%, change the blending mode to soft light, and add the gradient color shown below. Then go to effect > path > Offset path. Set offset-1 pixel, OK.
With the rectangle shape selected, add a three fill using the Add New Fill button in the Skin panel. Select the new fill, fill the black, reduce its opacity to 6%, and change the blending mode to multiply. Go to effect > path > Offset path, set -1px offset, OK after. Go to effect > Art > Film granules. Set the values shown in the following figure, and then click OK.
Using the Ellipse tool (L), create a circle of px, filling it with a radial gradient as shown in the following figure.
Disable Snap to Grid (View > Snap to Grid). Select a circle and copy two copies (Ctrl+c>ctrl+f>ctrl+f). Select the top copy layer to move up to 1 pixels. Re-Select this step to do both copies, and then select the Path Finder minus the top button. Fill with black and reduce its opacity to 20%.
Enable Snap to Grid (View > Snap to Grid), then Edit > Preferences > Guides and grids, set 1 pixels at the grid line interval. Using the Ellipse tool (L), create a 4x2px circle and take it as a third image. Fill the shape with white, reduce its opacity to 70%, and change the blending mode to soft light.
Disable the grid (View > Hide grid) and Snap to Grid (View > Snap to Grid). Re-select your ten px circle and two small shapes to group them (CTRL+G)
Select this group to add a new stroke to the appearance panel. Set the width of 1px, the color is R =35,g =31, B = 32, reduce its opacity to 10%, and change the blending mode to multiply. Continue to select this group, make sure it is still selected, then go to effect > Pathfinder > Add, then go to effect > path > Offset path. Set the 0.5px offset.
Now select the entire group (just click on the text "group" at the top of the appearance panel) to effect > Styling > Shading. Set the properties shown in the left window of the following figure. When you are sure, add the other two shadow effects, as shown in the following illustration.
Select all shapes, grouping them (ctrl+g)
Create a background, add a shadow
Select the Rectangle tool (M) and draw a rectangle with a width of 610px and a height of 760px. Select the rectangle and place it on the bottom (shift-control+[). Set its fill color to r = 254,g= 211,b = 170.
Align it in the center. Open the Alignment Panel (Window > Alignment). Set alignment artboard (options shown in open pop-up menu if you can't see the Alignment section as shown below), make sure your shape is selected, and click "Align Center horizontally, align Center vertically". When you're done, your rectangle should cover the entire artboard as shown in the following figure.
Select the background rectangle, add a second fill color to the skin panel, and a gradient fill as shown in the following illustration.
With the background rectangle selected, add a third fill color to the Appearance panel, and you need to set a built-in mode for the new fill. Go to the Swatches panel, open the pop-up menu, open the Swatch library > logo > Decoration > decorate the old version. Make sure the fill is still selected, add "fabric color" mode, reduce opacity to 20%, change blending mode for soft light, go effect > Art > Film granules. Enter the values shown below, and then click OK.
Choose the shape of the windmill to effect > Styling > Shading. Set the values of the 6 shadows, respectively, as shown in the following figure.
Here is the completion diagram. I hope you like the effect.
Well, the above information is small set for you illustrator of this software users brought to the detailed creation of delicate exquisite colorful windmill of the drawing tutorials to share the entire content of the users have seen here, small knitting believe that we are now very clear the production method of it, Then everyone will go to the small series of the above tutorial to make their favorite color windmill bar.
