I will give you a detailed analysis of the Illustrator software and share with you the tutorial on designing a vector bottle cap.
Tutorial sharing:
Step 2
Open a new file of 600 pixels × 400 pixels, and click on the canvas using the elliptic tool (L). A dialog box should be displayed. Enter the height and width of 100 pixels, now you should have a perfect circle on the canvas, and fill the circle with black without any stroke.
Step 2
Next, double-click the tool crystallization tool in the tray. The crystallization tool can be used according to the Meridian tool. A dialog box appears. Enter the settings as follows, and click OK.
Step 2
Now we have a Crystallization Tool to choose from, hovering in a black circle. If you have an alignment, you will find that the crystallization of tool management is directed to the center of the center. If the alignment point has not been started, see "> alignment to point. Once the Crystallization Tool is aligned to the black circle, click it once. Your Shape should now be shown in the following image.
Step 2
Next, draw the height and overwrite the old shape for a new cycle of 120px width.
Step 2
As the two shapes are selected, the cross-window button that hits the Pathfinder (window "> Pathfinder ). (Here, we can see from the figure below that it is the intersection subtraction .)
Step 2
Now go to the object "> transform" table. Set scaling to 200%, and click OK.
Step 2
Apply a linear gradient using 10% Gray and 60% Gray, make sure that the light color is on the left. Give it a-24 degree rotation. Under the gradient of the tray, you can find the window "> gradient.
Step 2
Now it's a tough issue. With the star tool selection (the star tool discovers the tool tray based on the rectangle/elliptical tool), click on the canvas. A dialog box appears. Give the pixel px value of radius 1, and the radius 2 is a 50 pixel value, set the period to 24, and then click OK.
Do it now, but this time it makes the value of 80 px with a radius of 2. You should now have two big 24-point stars. Now, all three shapes in the center. You may need to gently push and rotate the star shape to slightly sort the queued shape and look like the image below.
Step 2
Now select return to the most shape. Copy it ("Edit> Copy) and paste it on the front (" Edit> paste it on the front ). This will be a duplicate shape directly in front of you. Due to repeated selections, press Shift and select one star level for the two 24 points and create it in step 8. In the window Explorer, click the cross button (as shown below ). Copy and paste the shape on the front and back of the front to create another duplicate. Due to repeated selections, Shift down and select the other 24 stars. Hit the intersection button. Your Shape should now be shown in the following image.
Step 2
Next, select the frontend shape and use the white and gray 70% for a linear gradient. ROTATE 1-90 to ensure that the highest White value is the degree value.
Step 2
Along with the middle shape, give it a linear gradient, as well, but there are 50% and 20% Gray. Rotate a value of-24 degrees to ensure that the darker color is in the upper left corner.
Step 2
Next, create a circle and use the elliptical tool (long ). Make sure it is 215px high and wide. Center it and then give it a linear gradient using a white and gray 80%. Set 45 degrees of rotation, and make sure that the white is in the upper left corner.
Step 13
Create another center circle. This time, the pixel height and width are calculated. Give it a linear gradient using a white and gray 20%. Set 45 degrees of rotation and make sure that the white on the top is left.
Step 14
As selected in the New Territories, double-click the gradient tool (width) on the tool tray. A dialog box appears. Set the spacing to the specified step, give it a value of 10, and then click OK. Now, create the object "> hybrid>.
Step 2
Now we will add some colors. Select the shape, copy it ("Edit> Copy), and paste it back (edit"> BACK in the past ). This will duplicate the shape and the original behind it. The color is repeated in red (R = 220, g = 0, and B = 0 ).
Select all shapes except the shape of the new Red Group (object "> group ). As the group object is selected, go to the transparent window (window "> transparent), and select the multiplication from the drop-down menu. Your image should now look like the following.
Step 16
Now we can add some luster. To create a bow, create two large circles with PX width and height. They work on the center of the art, then gently push the left side of the circle 7px and down 7px. Because the two circles are selected, they hit the negative reception window button of the Pathfinder. You should have a crescent shape now. Select the shape and give it a linear gradient with white at both ends. Sets the opacity to stop at the right side of the gradient slider in 0% White. In addition, set the rotation to 45 degrees.
Step 17
How do I use text or familiar logos? You only need to select the font and text type. Mikey is good. Rosi is enough to let me use his font. This tutorial is about Ballon Vina. Be sure to override the solid red layer of your text, but lower than the group object. This will ensure that there are some shadows on your logo, otherwise it will look like this is just floating in front of the image.
Step 2
So, how can we compete? Is a copy of an existing object. Draw a rectangle with a PX height of PX width with a rectangle tool (meter. The center is in art.
Step 19
With the newly selected rectangle, the "longitude" flag is affected. Set to bend to 25%, and then click OK.
Step 20
Next, select the rectangle and go to the object "> Show appearance. Your shape should be as follows.
Step 21
Now there are two rectangular flag and red background shapes, hitting the gap window button pioneer.
Step 22
Delete two additional left and right shapes. Red to the top shape, color white shape, color blue bottom shape (r = 0 underground = 45, and B = 130 ). Select all the three-color shapes and go to the object "> arrange"> Send to return. You oppose the image that should look like the following.
Step 23
Now, bring back your text or logo. I repositioned the upper left corner of the 5 cent mark and re-colored text red. Remember to set the color icon above, but lower than the group object.
Step 24
To improve text and make it look more like a competitor's Year logo, select to subtract 5 cents of trademark text and influence the "Sutra" flag. Set to bend to 30, and then click OK.
Step 25
In the transform tray (window "> transform), set the rotation to 5 degrees.
Conclusion
You have it, a simple wine bottle cap. That's it!
All right, the above information is the detailed tutorial for designing a vector bottle cap for the users of this software of Illustrator, you can see that the software users here, Xiaobian, believe that everyone is very clear about the method of drawing, then everyone should follow the tutorial above to draw a vector bottle cap.
