Illustrator to draw happy smiling cartoon sun tutorials to share

To the users of the illustrator software to explain the detailed analysis of the cartoon sun to draw a happy smile of the tutorial.

Tutorial Sharing:

Software used: AI CS 4 (other versions of AI can also be drawn)

Difficulty: Intermediate

Estimated completion time: 30 minutes-1 hours

Step 1

Create a new document and draw a circle with the oval tool.

Step 2

Fill in the gradient panel with a radial gradient. Set the first color slider to light orange yellow, and the second slider to Orange. Next, in the gradient panel, set the position of the first color slider to 43. Select the midpoint indicator on the gradient bar to drag the position to 60. Move the gradient tool slightly from the center position to the top right.

Step 3

Creates a new circle and fills it with a radial gradient. The first slider is white and the second is light gray. Set the position of the midpoint indicator for the gradient to 87.

Step 4

Create a smaller circle in the middle, with the position relative to a circle to the right. Fills the circle with a radial gradient, with the first slider filled with light cyan and the second filled with dark cyan. Set the midpoint indicator position to 87.

Step 5

Then create a new circle in the middle of the previous circle (the one in the blue) and fill it with black. Create two smaller white circles and place them on top of the black circle. Now, one eye is ready.

Step 6

Select the white eyes of the circle (translator Note: That is, the whites of the part), copied and pasted in front. Select the copy and nudge it up. Change the color to dark orange. Select the white circle again, copy and paste it in front, move the copy to the bottom, and then change the color to light.

Step 7

Select all the shapes on the eye, copy and paste them in the front, then move the copy to the right of the main circle (the translator: head) and use the selection tool to narrow it down slightly.

Step 8

Use the Rectangle tool to create a rectangle that is roughly the same width as the eye, with a height of one-fourth of the eye.

Step 9

Use effects-stylized-rounded corners, in the dialog box, change the radius to 10px. The radius is selectable by you, depending on the size of your work. Then adjust it until you get a similar effect on the diagram below. Then, the object is vectorization by using the object-extended appearance. (Translator Note: I think you can use the rounded Rectangle tool directly)

Step 10

Use the effect-warp-arc, select the Horizontal button in the dialog box, set the bend to 25%, set the horizontal twist to 40, and then use the object-expand appearance to extend the object.

Step 11

Fill the deformed shape with a linear gradient, the first color slider is reddish brown, and the second slider is Crimson Brown. Use the gradient tool to adjust the gradient so that the dark is below the shape.

Step 12

Copy the eyebrow shape and paste it back, select the copy, move slightly to the left, and change the copy color to dark orange.

Step 13

The two shapes of the eyebrows are all selected, and the selection tool rotates slightly to the left. Copy the eyebrow shape and paste it in the front, using the object-transform-symmetry, in the pop-up dialog box, select Vertical and then click OK. Next, move the copy to the right side of the face, above the other eye. Select the dark orange shadow copy and move it slightly to the left of the right eyebrow.

Step 14

Create a new circle, roughly the same size as one eye, and place it in the middle of the eye.

Step 15

Fill the new circle with a radial gradient. We're going to add one more color slider to this gradient, which means there are 3 color sliders in the gradient bar. In the gradient panel, point to the center of the gradient bar, the first color slider is then set to very shallow orange, which is much lighter than the orange in the center of the Sun's face, and the middle color slider is the same as the edge of the sun's face, orange-yellow; Set the last slider to be as orange as the center of the Sun's face. Set the position of the midpoint indicator in the middle of the first and second sliders to 65. Finally, using the gradient tool, adjust the gradient and move the center of the gradient to the top of the circle toward the right.

Step 16

Copy the nose shape and paste it in the back. Use the direct selection tool to select the anchor point at the bottom of the replica, and then drag to the left to create a shadow.

Step 17

Create a circle by half the shape of the sun's face. Draws a rectangle covering the top half of the circle. Select all two shapes, and then click in the Pathfinder to subtract the top level.

Step 18

Fill the new mouth shape with a linear gradient, with the first slider in reddish brown and the second slider in Crimson Brown. Then use the gradient tool to adjust the gradient so that the darker part is at the top of the mouth.

Step 19

Copy the mouth shape and paste it in the back. Move the copy up a little and fill it with dark orange, copy the mouth shape again and paste it in the back, move the copy down slightly and fill it with light orange yellow.

Step 20

Create an oval that is about one-third the size of a mouth. Copy the ellipse and paste it in front, move the copy down slightly and enlarge it to One-fourth times the original size. Next, select the two shapes and click minus the top level in the Pathfinder.

Step 21

The new shape is filled with dark orange, copied and pasted in the back. Next, enlarge the copy and fill the color with light orange yellow. Place all two shapes underneath the shape of the mouth you have created.

Step 22

Select your newly created curved shape and copy and paste it in front. Use the selection tool to shrink and rotate the copy to the left, and then place it on the left side of the mouth. Next, copy the original curved shape and paste it in front, rotate it to the right and zoom out, then place it on the right side of the mouth.

Step 23

Select the deep color portion of the mouth shape body, copy and paste it in front, use the selection tool, and hold down the SHIFT key to pull the copy up slightly from the bottom to reduce the copy proportionally. Still using the selection tool, pull the copy up from the bottom and flatten it to One-fourth of the original size. In a linear gradient, the first color slider is set to white and the second slider is light orange. Set the position of the midpoint indicator to 80.

Step 24

Select the Star tool (which you can find at the bottom of the Toolbox's Shape Tool Group) and click on the pop-up dialog box on the artboard. Set the radius of 1 to 30px, RADIUS 2 set to 15px, angular number to 3 (RADIUS can be different, depending on the size of your work, but the radius of 2 must be a radius of 1 dimensions). Narrows the triangle horizontally to one-second of the original shape. Place the triangle in the center of the tooth. Next, select the teeth and triangles, and in the Pathfinder, press minus the top level.

Step 25

Use the Ellipse tool to create a new two circle at the bottom of the mouth shape, making sure to intersect half 22 of the two circles. Select the main mouth shape and copy and paste it two times before. Select one of the replicas (translator Note: A copy of the mouth shape), and then select the circle to the right and point to the intersection in the Pathfinder. Repeat the same steps for the circle on the left. Then fill the linear gradient for two circles, the first color slider take light pink, the second slider take pink. With the gradient tool, adjust each circle's gradient separately, pulling the gradient from the upper-right corner of the circle to the lower left corner.

Step 26

Select all the mouth shapes, place them on the sun's face, and rotate the mouth slightly to the right.

Step 27

Using the Star tool, click on the pop-up dialog box on the artboard. Create a new triangle with a radius of 1 100px, a radius of 2 50px and a corner point of 3 (as the previous article says: size can vary depending on the size of your work). Then use the effect-style-rounded corners, in the dialog box to change the radius to 20px, expand the shape, and finally use the selection tool to flatten down slightly.

Step 28

Fill with a three-step gradient for this triangle, the first color slider is light orange, the second slider is orange, and the third slider is dark orange. Select the midpoint indicator on the first slider and the second slider to set the position to 65, then set the second slider to 60, and then set the position of the second slider and the midpoint indicator on the third slider to 15. Use the gradient tool to pull the gradient from the top to the bottom.

Step 29

The copy triangle gets two triangles, selects the copy, uses the effect-deform-arcs, in the pop-up dialog box, selects the vertical button, changes the bend to 30, then expands the appearance.

Step 30

Copy the first triangle, rotate the copy so that it looks as if it were fired from the face of the sun, and be sure to place the triangle at the bottom of all other shapes by using object-arrange-at the base. Then around the sun, rotate and place several copies of the triangle, make sure that all the triangles are placed at the bottom. (Translator Note: Please note that the rays of the sun are partly staggered by triangles with radians and triangles without radians.) )

Step 31

Select the Sun face body shape and copy and paste it in the back. Select the copy to move slightly downward, and then change the copy color to dark orange.

Step 32

Add some small details to the sun, and draw some circles of different sizes at the corners of the mouth. Finally finished painting!

The use of this example

Here are some sample pictures used in this tutorial. A logo for the fictional alternative energy children's Learning Center, and the second one is a global warming diagram for children (I know it's not very accurate). It is not difficult to apply these illustrations to other programs or to adapt them to other illustrations (such as Earth illustrations in global warming diagrams). Try to see what you can do and how to make the most of it.

Well, the above information is small weave for you illustrator of this software users brought to the detailed drawing of a happy smile of the cartoon sun tutorials to share the full content of the You see the users here, small knitting believe that you now see here is very clear the production steps, Then everyone will go to follow the small series of tutorials to draw their own lovely cartoon sun Bar.