[Import] 5200 miraculously revived!

After three years, the platform fx5200 finally regained its day. It's strange to say that it's really strange. It's just as amazing as a mummy's resurrection.
I spent more than 600 yuan on this video card when I graduated from high school. At that time, I got on the DX9 train. But it was not a long time. I had to clean my computer on the day of migration, and the video card was useless. This video card is well designed and has three lights on it, which correspond to err, pwon, and agp4x/8x respectively. You can intuitively see the working status of the video card. However, when the host is turned on, it is a red light, err. 1D is displayed on the motherboard. I don't know what the problem is. I just called customer service and our Customer Service told me that there was a problem with the video card. Alas ~~~~~~~ Fix it to see if it can be repaired.
Then I got the computer city to repair it. The result was a red light when I inserted it to another computer. The core of the video card had no temperature and it was determined that the core was burned out. At that time, it was possible to think about static electricity.
Then I bought Onda's 5700s, And the 5200 was lying in the cupboard.
Today I want to use the modified 5700 test. Program In the result 5700, the error 1D was also reported when the motherboard was inserted. Mom, it would not have burned this 5700. I used it not long ago! What about the 5200 plug-in? Still, red ~~ Take out the old tnt2 and start it.
Then go to the computer with 120 yuan to see if 5700 is good or bad. It's strange, just a little bright. What about 5200? Insert it. I thought it would be "red" and the result would be "green". The startup is successful ~!!!!! What's going on ~~~~~!!! I plugged 5200 back to the primary board, and it is miraculously not "red" now! Basic operation normal! Depressed, I still want to break down this 5200 before, so I can split parts as welding boards. As a result, it turned out to be a good one ~!!!!!!!!!!!
Mount 6600gt and start it successfully. Check it online. It turns out that initial early_pm_init switch does not know what the switch is. 正8rda model many motherboard encountered such a problem, then the video card is not available. It's strange.
Some people say they are in conflict with IDE, So I reset the CMOs, disable all the things that can be switched off, remove 6600gt, and insert 5700. It's still the same 1D !!!
According to my analysis, because 6600gt works in 2D without an external power supply, it consumes very little energy and the power supply of the Main Board can be started. This is also true for tnt2. However, when 5200 and 5700 are started, the energy consumption is high, which may be due to a problem in the AGP Power Supply Module (the electrolytic capacitor may be invalid) and cannot be started. The reason is basically figured out. In the bios, The AGP voltage is increased from 1.5v to 1.6 V, and then 5700 is replaced. The result is started successfully. However, 5200 still cannot be started. Isn't 1.6v enough. For safety, I have not increased the voltage any more. As long as there is 5700, It is enough.
It's so tired that it's just gray ~~~~~~~ I still don't know how long this motherboard can last ~~~~~ Sleeping ~~~~~~~
Article Source: http://www.hesicong.net/pjblog/default.asp? Id = 156