In-depth analysis of Huawei Switch configuration Tutorial: static and VTP management domains

In-depth analysis of Huawei Switch configuration Tutorial: static and VTP management domains, how to choose the appropriate Huawei Switch configuration tutorial, let's talk with the following detailed examples. The following examples of the Huawei Switch configuration tutorial are all met. The data obtained by the experts through practice ensures that you can be improved.

The Huawei Switch configuration tutorial configures static VLANs on IOS-based switches:
Switch # vlan database
Switch (vlan) # vlan-num name vla
Switch (vlan) # exit
Switch # configure teriminal
Switch (config) # interface module/number
Switch (config-if) # switchport mode access
Switch (config-if) # switchport access vlan-num
Switch (config-if) # end
In the configuration tutorial of a Huawei switch, configure a static VLAN on a CLI-based switch:
Switch (enable) set vlan-num [name]
Switch (enable) set vlan-num mod-num/port-list

The Huawei Switch configuration tutorial configures VLAN trunk lines on IOS-based switches:
Switch (config) # interface mod/port
Switch (config-if) # switchport mode trunk
Switch (config-if) # switchport trunk encapsulation {isl | dotlq}
Switch (config-if) # switchport trunk allowed vlan remove vlan-list
Switch (config-if) # switchport trunk allowed vlan add vlan-list
In the Huawei Switch configuration tutorial, configure a VLAN trunk line on a CLI-based switch:
Switch (enable) set trunk module/port [on | off | desirable | auto | nonegotiate]
Vlan-range [isl | dotlq | dotl0 | lane | negotiate]

The Huawei Switch configuration tutorial configures the VTP management domain on the IOS-based switch:
Switch # vlan database
Switch (vlan) # vtp domain-name
In the Huawei Switch configuration tutorial, configure the VTP management domain on the CLI-based switch:
Switch (enable) set vtp [domain-name]

In the configuration tutorial of Huawei switches, configure the VTP mode on the IOS-based switch:
Switch # vlan database
Switch (vlan) # vtp domain-name
Switch (vlan) # vtp {sever | cilent | transparent}
Switch (vlan) # vtp password
In the Huawei Switch configuration tutorial, configure the VTP mode on the CLI-based switch:
Switch (enable) set vtp [domain-name] [mode {sever | cilent | transparent}] [password]

The Huawei Switch configuration tutorial configures the VTP version on the IOS-based switch:
Switch # vlan database
Switch (vlan) # vtp v2-mode
In the Huawei Switch configuration tutorial, configure the VTP version on the CLI-based switch:
Switch (enable) set vtp v2 enable