In-depth introduction to specific testing solutions of Huawei Gigabit Switches

In-depth introduction to the specific testing solution of Huawei gigabit switches. The following describes the performance testing problems of Huawei gigabit switches. The purpose of this evaluation is to make an objective comparison of each manufacturer's Gigabit Ethernet products. The main purpose of this comparison IS to provide the IS Administrator and other IT professionals with information that helps them make device procurement decisions.

Therefore, our test is not limited to the performance test of Huawei gigabit switches, but is a comprehensive consideration, both using quantitative metrics such as throughput, packet loss, latency, and per-gigabit costs ), also use qualitative measurement criteria such as whether installation and management are simple and reliable ).

Our main test items are: configuration testing-considering the flexibility, port density, and scalability of the configurations of Huawei gigabit switches. Installation and usability testing-time and difficulty of installation, support documentation, and online help effectiveness. Feature test-including Port Link aggregation.

Traffic control, MAC Address Table capacity, port image, VLAN, layer-3 switching, redundancy, MAC-based security, QoS, spanning tree, and multicast control. Management tests Test the capabilities of the console and command line interface, and support for Web, SNMP, and RMON. There are also important performance tests.

We use the industry-renowned network performance tester IXIA 1600 in performance testing. IXIA 1600 can be inserted with a maximum of 16 modules. Our test environment includes 5 10/100 M Adaptive modules, each of which has 4 10/100 Base-TX ports and 6 10/100/BASE-T adaptive LM1000T modules, each module has 2 10/100/M RJ-45 ports.

Five GBIC modules, each with two 1000Base-SX/LX ports. Such a complete test environment allows us to test 12 1000Base-T ports, 10 1000Base-SX ports, and 32 10/100 Base-TX ports at the same time. Therefore, we can perform full load tests on the high-density Huawei gigabit switches in the products to test their actual performance under the strictest conditions. During the test, we used Category 5 jumpers and optical fiber jumpers to connect to the Huawei Gigabit Switch and tester.

The complete test environment allows us to test 12 1000Base-T ports, 10 1000Base-SX ports, and 32 10/100 Base-T ports at the same time. Able to perform full-load tests on high-density Huawei gigabit switches in the products to test their real performance under the strictest conditions.

In this test, we mainly use the ScripMate software of the IXIA1600 tester to configure and run various indicator tests. ScriptMate specially designed standard automation scripts for RFC 2544 and RFC 2285, we can easily define various parameters based on our own needs, while generating detailed log files and file describing results.

We have formulated nine testing indicators based on RFC2544, RFC 2285, And the Gigabit Ethernet test specification of China's communication industry, they are throughput, frame loss rate, back-to-back, latency, partial mesh, full mesh, back pressure, line-End Blocking, and error frame filtering, it basically covers the main performance indicators that need to be considered when selecting a Huawei Gigabit Switch.

During the test, all ports of IXIA 1600 allow Adaptive Traffic Control and disable traffic control by default. In this test, three typical frames of 64-byte, 512-byte, and 1518-byte length are considered, unless otherwise specified, all tests are performed in full duplex mode. To ensure the reliability and accuracy of the test conditions, each test is repeated three times. The final result is to take the average value of the three tests.

In the throughput test, the port configuration is 1-to-1 ing, And the throughput is tested at full load. In the frame loss rate test, we set the initial speed to 100%, and test the frame loss rate through the ing between Port 1 and 1. In terms of latency testing, the Huawei Gigabit Switch includes the 10-Gigabit port and 1-gigabit port.

The latency between Mbps ports is significantly different from that between Mbps ports. Therefore, we have conducted three tests on the same module, cross-module, and Gigabit ports, each test selects a pair of two-way data transmission ports. For a Huawei Gigabit Switch with an abnormal delay of 100% wire speed, we will test the speed adjustment slightly.

In the mesh test, a full mesh test is conducted for the 1-gigabit backbone Huawei Gigabit Switch. For 1-gigabit access to the Huawei Gigabit Switch, part of the mesh test method is used, each gigabit port corresponds to 10 10-Gigabit ports, and the remaining 10-Gigabit ports are used for a full mesh test. In the Back-to-Back test, the port configuration is 1-to-1 ing under full load, and the initial speed is set to 100%.

Back-pressure testing uses two methods. In half-duplex and full-duplex states, data is sent to one port through three ports to check whether back-pressure and IEEE 802.3x traffic control are supported. For line congestion, port A and B are used to send data to port C to form A congestion port, while port A also sends data to Port D to form A non-congested port. For error frame Filtering, we use one-to-multiple ing to test the six typical error frames, namely, small frame, ultra-large frame, CRC error frame, fragment, alignment error, and dribble error.

During the configuration, installation, and usability, features, and management tests, our engineers carefully read the instructions provided by the vendor, and actually configured and installed the Huawei Gigabit Switch, the management methods of the Huawei Gigabit Switch, as well as link aggregation, VLAN, MAC address filtering, static Unicast address, port image, and other functions are configured through the Console port, Telnet, and Web. try, alibaba Cloud manages Ge switches with the network management software provided by various vendors.

In addition, we also used a MIB Browser to view the MIB of the Huawei Gigabit Switch. In our overall evaluation of a Huawei Gigabit Switch, performance accounts for 40% and cost-effectiveness accounts for 10%, while other functions, configurations, features, management, and installation usability accounts for 50%.