Inkjet Ink and paper

The quality of Ink Jet has a lot to do with paper, and paper is also a learning. I print on three different types of paper. There are three kinds of ink: 1. It is Dan Jun's General ink (dye ink), 2. Dan Jun's professional ink (dye ink), and 3. It is printing-dimensional pigment ink, these are both water solvents and non-oil solvents.

One is that I usually use printing, and the A4 paper that most people use is the same. I use the paper of an old-fashioned pinhole printer, I like the size of a Letter when I tear down the side with a needle. It is a little wider than A4 and it gives me a better feeling. The size of A4 is also reasonable. The ratio of length to width is 1.414 (Root 2): 1. In this way, the ratio of width to width is still the same, which is more scientific for cutting paper, but for my senses, it is not as elegant as the letter size. In addition, the paper is thin and the color is natural. The current A4 paper is too bleached, and it has reached the White level and looks uncomfortable. It looks a bit colorful.

This kind of paper is not very beautiful, it is a bit of purified water, which will affect the ink of the water solvent. The General ink obviously becomes water, the pigment ink also becomes water, and the two kinds of ink are relatively transparent (that is, turning over the opposite side to see the obvious content printed on the back). In principle, pigment ink will not penetrate, and printing of pigment ink is darker, the paper is thin, it is estimated that transparent. Professional ink has the best effect. Paint ink sharp edge, I tested, This is the fact, better than the two kinds of dye ink, the premise is that the paper can not be purified. Therefore, the key is to use the ink.

One is single-sided photo paper, taking photos. For R4, it is equivalent to A6. I have bought some of them, but it is also the same as that of the printing store. for digital photos, it is relatively narrow, A digital photo is about 4: 3, that is, 1.333: 1. Therefore, the entire photo cannot be taken out unless it is left blank. I found it online. I didn't find the size of the printing store, but I didn't find it. I bought 300 copies. I don't know when to hit it. The normal ink has been put aside. Reading and photo surfaces are good, but they cannot be compared. However, for non-photo surfaces, use pigment ink to completely purify the water, and use Dan Jun professional ink, however, it may take some time for the ink to dry. This is still the water paper should use Dan Jun professional ink number.

The other is copper sheet. I bought 160 grams of A3 and cut it myself. I can cut a letter and a 16 K/B5. This paper is very thick. I will buy it thin next time. The printing effect of copper sheets is very good. 160 is the thickness of a standard unit area of paper. A3 paper is 160 and equal to 80 of A4, which is twice the thickness of A4 80. 160 is really thick. The common A4 is about 75 grams.

Today, I went to my cousin's house and took a picture of koi.