ELM327 Buletooth/wifi OBD2 Code Scanner is handle scan tool which can work with iphone,ipad,android. ELM327 support reading and clearing fault Codes,display current sensor data including Engine Rpm,fuel System status,vehicl e speed and so on. ELM327 also has a USB version on careucar.com.
This article'll guide is on the How to install ELM327 Bluetooth OBD scanner on your Android device. (This also applies to jailbroken IOS devices.)
STEP 1: Turn on Car Ignition and then Plug in ELM327 Bluetooth Scan Tool into Cars Port
First Turn on cars ignition (one position before engine starts). And only then ...
Plug ELM327 Bluetooth scanner into cars connector.
STEP 2: Pair ELM327 Bluetooth Device to Phone/tablet
(Note: you are only having a seconds to pair of the Bluetooth scanner from the time you connect it to the Car-to the TI Me of entering the pairing code. If more then second pass-then pairing code would be a rejected and you'll have to plug out the scanner and try again. So has your Bluetooth devices window open, so can immediately connect as soon as you see Elm327/obdii/unknown Device Show up.)
Touch settings»wireless & Networks»check the Bluetooth box and go to»bluetooth Settings.
From Here-scan for Devices and ELM327 Bluetooth OBD scanner would show up as Either:elm, ELM327, CAN, OBD, etc.
When you ' re asked-passcode to pair, enter:6789
If "6789" doesn ' t work, then try "1234" or "0000".
done!
STEP 3: Launch the OBD App
Launch the OBD app you ' ve downloaded from Google Play store or the Dealer-and connect to ELM327. This is usually do in "Settings" within the App.
Example of typical Android OBD app.
Happy Car scanning!
Install ELM327 Bluetooth OBD Scanner on Android phone/tablet