Install BigBlueButton on Ubuntu 10.04.4 (Video classroom)

Install BigBlueButton on Ubuntu 10.04.4 (Video classroom)

System Environment:

Ubuntu system 10.04.4 (64) Bit installed on XenCenter ----> it must be a system of version 10.04.4

---- I did not configure the network address during system installation, but I configured the Host Name and management user and password ----

--- Ubuntu Network Address Configuration ---

1. Open the/etc/network/interfaces file of Ubuntu. The default content is as follows:

Auto lo

Iface lo inet loopback

2. Add the address eth0 of a NIC

$ Vi/etc/network/interfaces

Auto lo

Iface lo inet loopback

Auto eth0

Iface eth0 inet static

Address 192.168.1.196

Netmask 255.255.255.0

Network 192.168.1.0

Broadcast 192.168.1.255

Gateway 192.168.1.1

$ Sudo/etc/init. d/networking restart

$ Ifconfig

3. Configure the DNS server address. A maximum of three DNS servers can be used.

Nameserver 127.0.0.1

Nameserver 192.168.1.2

Nameserver 192.168.1.3

====================================== Start a BigBlueButton tour ========== ============================================

1. Update the system:

$ Cat/etc/lsb-release

DISTRIB_ID = Ubuntu DISTRIB_RELEASE = 10.04 DISTRIB_CODENAME = lucid

DISTRIB_DESCRIPTION = "Ubuntu 10.04.4 LTS"

$ Cat/etc/default/locale

LANG = "en_US.UTF-8"

If you have not installed and run the following command:

Sudo apt-get install language-pack-en

Sudo update-locale LANG = en_US.UTF-8

Run port 80: sudo apt-get install lsof

Lsof-I: 80

Add bbb keywget http://ubuntu.bigbluebutton.org/bigbluebutton.asc-O-| sudo apt-key add-

Add Source Address

# Add the BigBlueButton repository URL and ensure the multiverse is enabled

Echo "deb http://ubuntu.bigbluebutton.org/lucid_dev_08/ bigbluebutton-lucid main" | sudo tee/etc/apt/sources. list. d/bigbluebutton. list

Echo "deb http://us.archive.ubuntu.com/ubuntu/ lucid multiverse" | sudo tee-a/etc/apt/sources. list

The most worrying thing is to update the system: --------------> wait... sudo apt-get update

Finally .....

 

2. Install ruby:

Check whether dpkg-l | grep ruby has been installed before installation.

If you do, the version must match 1.9.2p290.

$ Ruby-v

Ruby 1.9.2p290 (revision 32553)

If it is not installed, you need to install ............... sudo apt-get install zlib1g-dev libssl-dev libreadline5-dev libyaml-dev build-essential bison checkinstall libffi5 gcc checkinstall libreadline5 libyaml-0-2

Create a script

$ Sudo vi install-ruby.sh

#! /Bin/bash cd/tmp

Wget http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p290.tar.gz

Tar xvf ruby-1.9.2-p290.tar.gz

Cd ruby-1.9.2-p290./configure -- prefix =/usr \

-- Program-suffix = 1.9.2 \

-- With-ruby-version = 1.9.2 \

-- Disable-install-doc

Make

Sudo checkinstall-D-y \

-- Fstrans = no \

-- Nodoc \

-- Pkgname = 'ruby1. 9.2 '\

-- Pkgversion = '1. 9.2-p290 '\

-- Provides = 'ruby '\

-- Requires = 'libbc6, libffi5, libgdbm3, libncurses5, libreadline5, openssl, libyaml-0-2, zlib1g '\

-- Maintainer = brendan.ribera@gmail.com

Sudo update-alternatives -- install/usr/bin/ruby/usr/bin/ruby1.9.2 500 \ -- slave/usr/bin/ri/usr/bin/ri1.9.2 \ -- slave/ usr/bin/irb/usr/bin/irb1.9.2 \ -- slave/usr/bin/erb/usr/bin/erb1.9.2 \ -- slave/usr/bin/rdoc/usr /bin/rdoc1.9.2 sudo update-alternatives -- install/usr/bin/gem/usr/bin/gem1.9.2 500

Note that there is a problem in the official document in line 2 of the above script;

Grant script execution permission to chmod + x install-ruby.sh

/Install-ruby.sh

$ Ruby-v

Ruby 1.9.2p290 (revision 32553)

$ Gem-v

1.3.7

$ Sudo gem install hello

Successfully installed hello-0.0.1 1 gem installed Installing ri documentation for hello-0.0.1... Installing RDoc documentation for hello-0.0.1...

3. Install BigBlueButton

Sudo apt-get install bigbluebutton

4. install API Demossudo apt-get install bbb-demo

Download, install, and configure Ubuntu 14.04

Ubuntu 14.04 system:

Ubuntu 14.04 text tutorial on hard drive installation in Windows 7

 

This article permanently updates the link address:

1 2 Next Page