Install Google PinYin Input Method in Ubuntu and solve the problem that the input method cannot print Chinese Characters

Install Google PinYin Input Method (in fact, scim extension) in Ubuntu, as follows: A. Get the code: (install git first without git: sudoapt-getinstallgit-core) $ gitclonegit: // container

Install Google PinYin Input Method (in fact, scim extension) in Ubuntu as follows:

A. get the code: (install git first without git: sudo apt-get install git-core)

$ Git clone git: // github.com/tchaikov/scim-googlepinyin.git

$ Cd scim-googlepinyin

B. Prerequisites for compilation:

The above link describes how to compile the program, but introduces a few required components, which are listed below:

* Autotools-dev

* Libgtk2.0-dev

* Libscim-dev

* Libtool

* Automake

Run the following command to check whether the tool is installed. If not, it will automatically help you install the tool:

$ Aptitude install autotools-dev libgtk2.0-dev libscim-dev libtool automake

C. Compile:

Remember that the system must first have SCIM (if not, sudo apt-get install scim)

$./Autogen. sh

$ Make

$ Sudo make install

Restart scim:

Disable scim: pkill scim

Then start: scim-d

Select scim as the default input method for "language-supported" Input Method in the preference. Then, log out and click OK.

If Google's input method cannot print Chinese characters, restart scim to solve the problem.

For more information about Ubuntu, see Ubuntu special page http://www.linuxidc.com/topicnews.aspx? Tid = 2