Install Sensors host Temperature Monitoring Program on CentOS

 

Download lm_sensors and sensors-applet.

Here, lm_sensors found the rpm package file: lm_sensors-3.0.1-5.fc9.i386.rpm

It can be seen that the rpm package for fc9 is available for installation because both fc and centos belong to the redhat series.

Download Page: http://rpm.pbone.net/index.php3/... 1/search/lm_sensors

There are many software packages available for installation in different linux distributions.

The rpm package is easy to install. You can download the rpm package and double-click it. The installation may involve dependency issues. Install the rpm package one by one.

After installation, run sensors. If no sensors found is displayed, run sensors-detect. Press enter to install sensors by default. Then run sensors to check the cpu voltage, temperature, and other information.

Next, install the sensors-applet. This program is the graphical interface of sensors.

Since only the Deb package exists, centos can only pass through the tar.gz source program and requires compilation and installation.

File Name: sensors-applet-2.2.1.tar.gz

Download: http://sensors-applet.sourceforge.net/index.php? Content = source

Installation Method After download:

Tar xzvf sensors-applet-2.2.1.tar.gz

Cd sensors-applet-2.2.1

./Inconfigure -- prefix/usr

Make

Make install

Dependencies are also involved during installation. install them one by one.

After the installation is complete, right-click menu bar, select "add to panel", and select "Hardware Sensors Monitor" to display the cpu temperature on the menu bar.