Install IPv6 protocol stacks of different versions in windows

Generally, the common operating system is windows. Therefore, the installation and configuration of Its IPv6 protocol stack are relatively simple. However, windows has many system versions, which are different in terms of installation. Now we will summarize the installation methods of IPv6 protocol stacks in different versions of windows.

Windows XP and Windows Server 2003 can directly support IPv6, while Windows 2000 can be supported only by installing plug-ins.

◆ In Windows XP, how does one install the IPv6 protocol stack?

In the command line window, enter the following command:

IPv6 install

2. In Windows Server 2003, how does one install the IPv6 protocol stack?

In the command line window, enter the following command:

Netsh interface IPv6 install

◆ Another method: configuration commands in Windows XP/Windows2003

The IPv6 protocol stack is built in Windows2003. We recommend that you upgrade Windows XP to SP1 at least.

1. First install the IPv6 protocol stack

C: \> IPv6install

2. If you are accessing from a pure IPv6 network environment, you can get the IPv6 address and access the IPv6 Site.

Appendix: Some Common commands:

C: \> netsh
Netsh> interfaceIPv6
NetshinterfaceIPv6> addaddress "Local Connection" fe80: a520: 1314: 1/* set a fixed IPv6 address */
NetshinterfaceIPv6> adddns "Local Connection" 2001: 251: e101: 0: 2/* Set IPv6DNS address */

3. If you connect through a tunnel, perform the following steps:

Configure IPv6 network parameters in XP. if the address is automatically applied for from tb.sjtu.edu.cn, execute the act. bat file. The following steps can be saved)

Listen 6ifcrv6v4202.112.26. xxx202.112.26.253/* Create a V4-to-V6 tunnel, 202.112.26.xxxisyourlocal1_4address */
Listen 6adu5/3ffe: 3207: xxx: xxxx. xxxx/* configure the applied V6 address */
IPv6rtu:/05/* configure defagateway gateway */
Listen 6ifc5forwards

◆ In Windows 2000, how does one install the IPv6 protocol stack?

1) For machines with only SP1 forwin2000, directly install tp2136-001205.exe.

2) If your machine is installed with SP2/sp3forwin2000, install tp2136-001205-sp3-ie6.zip.

3366if sp4forwin2000is installed, install ipv6_2000sp4.rar

After decompression, run hotfix.exe to restart the machine and install the IPv6 protocol as follows:

From the control panel, go to "network and dial-up connections", right-click "Local Connection", click Properties, open the "Local Connection Properties" window, and click "Install, in the displayed window, select "protocol" and click "add... ", in the pop-up window, you will find" MicrosoftIPv6Protocol ". Select this option and click OK. The TCP/IPv6 protocol stack has been installed.