Install meego 1.2

How to install meego 1.2 to emmc


Original post
Http://www.w Hill D up a. c I n/thread-11062-1-1.html

If you have a Linux system, stop thinking about windows.
Flasher-3.5 is used to load the kernel and image.
1. Enter XT input.
Wget http://timoph.fi/de-installer.tar.gz
Tar xzvf de-installer.tar.gz
CD de-Installer

After installation, there are three files in the directory. Put the image and kernel files in this directory.
= I tried the method before this line. Someone passed the test. If you have time, try it (the maemo system will be permanently deleted) ========================================================== =======,
2. Disable N900 and take out the external storage card.
3. Connect to USB and run the following command to start the installer:
Sudo./n900-de-emmc-installer.sh-I image file-F-K Kernel File

The installation time is 10-30 minutes, depending on the version of the image you are using.
Image and Kernel File http://repository.maemo.org/meego/n900-de/
Meego installation source is in this https://meego.gitorious.org/meego-quality-assurance/meego-ai


========================================================== ====================

How to install meego 1.2 into a memory card

The software mentioned below can be downloaded here. We would like to thank ye gang for its support.
1. Download the image file and Kernel File http://repository.maemo.org/meego/n900-de/
(The image file * .raw.bz2 Kernel File has no suffix)
2. Install the original image file (installation instructions for Linux and Windows systems) on the micro-SD card with a capacity greater than 2 GB ).
Original official saying:

• Download and install Bzip2 to Windows http://gnuwin32.sourceforge.ne t/packages/bzip2.htm
• Uncompress raw image in command prompt "bunzip2.exe <compressed raw image>"
• Download the win32diskimager.exe program: https://launchpad.ne t/win32-image-writer/+ download (ZIP file)
• Unzip the file and extract the contents to a known directory
• Run w32diskimager.exe
• Select the meego image file (note you must write *. * file name to see all files)
• Select the drive letter which corresponds to the microSD memory card.
• Click the "write" button to byte-copy the image to the microSD memory card.

• The main meaning is:
• Download Bzip2 and install it in Windows (WinRAR can also be used). decompress the downloaded image file to obtain *. Raw and change the suffix to IMG.

Download win32diskimager, decompress it, run win32diskimager.exe, select the file you just decompressed, and select the drive letter of the storage card,
Click write to write data. (Do not place it in the Chinese directory. Otherwise, an error occurs and cannot be written. If "an error occurre when attempting to get a handle on the file" appears when writing the SD card ", put the card back into N900, format it, and try again. When writing data with win32diskimage in win7, the system may prompt not enough space on disk, which causes the write to fail and should be run as administrator. [I would like to thank you for the problems found in oil 289726731 ])

(If the storage card is 2 GB or above, the files in the card will be deleted. Back up the files)

• 3. Insert the micro-SD card into the Nokia N900.
• Insert storage card and cover the back cover

• 4. Install the kernel on the Nokia N900.
  The downloaded kernel is useful (names are usually very long. You can change a simple file name, for example, 1)
  In flasher3.5, enter:
  Flasher-3.5.exe-L-K Kernel File Path (for example: C:/meego1.1/1, to carry the file name)-B
• 
  Enter
• Press and hold the U key to plug in the USB.
  
• 
  Penguin appears on the screen of the mobile phone.
• Congratulations! You have succeeded!
• Meego is installed in the storage card and has no effect on the mobile phone. If you do not want to use meego, format the storage card!

==========================================================


(Transfer) about dual-start (meego1.1 ):
Input
Root
Apt-Get update
Apt-Get install uboot-pr13
Install meego1.1 In the TF card. meego is started and maemo is started if meego1.1 is not in the TF card.
You can also enter
Run noloboot
Direct boot to maemo

 

Article Reprinted from: http://bbs.dospy.com/thread-8484641-1-315-2.html