Install minitools + minitools in Ubuntu and download linux to the Development Board.

Install minitools + minitools in Ubuntu and download linux to the Development Board.
1. Install minitools in Ubuntu

1. Find the MiniTools-Linux-20130513.tgz, which is in the mini2440 CD linux platform tool folder

2. I copied it to my/home/lianghuiyong/Linux_share/directory.

3. # cd/opt/FriendlyARM/mini2440

4. # tar xvzf/home/lianghuiyong/Linux_share/MiniTools-Linux-20130513.tgz

5. # cd/opt/FriendlyARM/mini2440/MiniTools-20130513 // open the minitools directory

6. #./start. sh // open minitools

Ii. minitools I wrote it out before linux was written to the Development Board! Enter the subject. (1) Burn linux to nandflash1. the development board to norflash, connect the USB cable, serial cable, and 2. open minitools, open minicom // how to configure minicom3. select the image directory from the image directory and select the image directory in the CD. You can also select the file to be modified for the folder content. 4. after selecting the file, start to burn it... minitools

(2) Enable the nandflash Development Board. 1. Enable the Development Board to reach the nandflash end and connect the serial port. 2. Enable the configured minicom3. power on the terminal. After the minicom Development Board is powered on



Now, the linux kernel is written to the Development Board.

Ubuntu 1404LTS mini2440 NFS mounting failed

Install a wireshark on ubuntu and capture packets to see where the nfs error is.