Install NIC Driver in dos7.1 on Vmware workstation 8.0 Virtual Machine and solve memory insufficiency errors

Sometimes, after installing the dossystem in a VM on Vmware workstation and installing the NIC Driver and micorosoft Network Client 3.0, the Network driver cannot be loaded successfully and an error message is displayed:

Error8: there is not enough memory available.

Solution: Go to the C: \ Net directory, use edit to open sytstem. ini, and change autostart = full:

Autostart = basic. Then save and restart the system.

As shown in:

For the installation method, search for "Vmware workstation 8 install dos7.1 NIC Driver" in Baidu to find the installation document I published.

Alternatively, you can see the following URL:
 
Http://www.docin.com/p-345333930.html
 
For the vmware for dos NIC Driver and micorosoft Network Client 3.0, see:

Bytes

 

Related: Change autostart = full to Autostart = basic. Basic indicates all standard functions. Full indicates that in addition to Standard Workgroup, it also includes domain and advanced network functions. Suitable for large network applications. But in fact, we only share files and other purposes at ordinary times. In addition, "Full" means more system memory is enabled. This is also the key to leading to insufficient memory. If more network functions are required, we need to sacrifice other system startup files and close them to release the memory. This article will not be discussed for the moment.

From vs9841