Install Nvidia graphics card on Ubuntu 10.04

Source: Internet
Author: User

 

Lenovo notebook Y450, Ubuntu 10.04.3 LTS

 

1. issues that can be solved:

 

(1) After the driver is installed, the screen is displayed on and off, with a low resolution;

(2) The Boot screen appears directly, and the progress is missed.

2. Solution: uvesafb replaces vesafb (I don't know what it means)

3. required packages:

(1) v86d (required by uvesafb)

(2) hwinfo (view framebuffer)

4. Steps

(1) install the driver:

Method 1: download the latest driver from the Nvidia official website, but you have to block nouveau first, and there will be a huge Nvidia Logo after installation. I didn't use this method.

Method 2: System --> Administration --> Hardware Drivers.

 

I am using the first one, but there is a problem. We need to disable the built-in nouveau first.

 

The procedure is as follows:

 

Install the driver with the official driver, copy the driver to the main folder, and press Ctrl + Alt + F1 to return to the terminal and log on to sudo/etc/init. d/gestation stop, and then run sudo sh. /Nv ....... (driver software name), it will prompt nouveau to be in use, and then will ask you if you want to create a file to prohibit nnouveau, select Yes, keep clicking, will exit the terminal interface, sudo reboot restarts to the machine learning platform for AI desktop, press Ctrl + Alt + F1 to return to the terminal, and log on to sudo/etc/init. d/gestation stop, remove X desktop, and run sudo sh again. /Nv ....... (driver software name), the driver will be installed normally, after sudo reboot is installed, complete.

 

If we follow the above steps, we will also prompt nouveau to be in use, that is, it is not completely blocked, because the kernel is still loading nouveau. It seems that both 10.04.3LTS and later versions do not work. Solution:

 

After the/etc/modprobe. d/nvidia-installer-disable-nouveau.conf file is generated, execute:

 

1

Update-initramfs-u

2

Update-grub2

Restart the system to install the NVIDIA driver.

(2) installation package:

 

1

Sudo apt-get install v86d hwinfo

 

(3) view framebuffer

 

1

Sudo hwinfo -- framebuffer

The result is as follows:

 

01

Tsl0922 @ ubuntu :~ $ Sudo hwinfo -- framebuffer

02

02: None 00.0: 11001 VESA Framebuffer

03

[Created at bios.464]

04

Unique ID: rdCR. wTajKRFEdh8

05

Hardware Class: framebuffer

06

Model: "NVIDIA GT216 Board-0695a340"

07

Vendor: "NVIDIA Corporation"

08

Device: "GT216 Board-0695a340"

09

SubVendor: "NVIDIA"

10

SubDevice:

11

Revision: "Chip Rev"

12

Memory Size: 14 MB

13

Memory Range: 0xcf000000-0xcfdfffff (rw)

14

Mode 0x0300: 640x400 (+ 640), 8 bits

15

Mode 0x0301: 640x480 (+ 640), 8 bits

16

Mode 0x0303: 800x600 (+ 800), 8 bits

17

Mode 0x0305: 1024x768 (+ 1024), 8 bits

18

Mode 0x0307: 1280x1024 (+ 1280), 8 bits

19

Mode 0x030e: 320x200 (+ 640), 16 bits

20

Mode 0x030f: 320x200 (+ 1280), 24 bits

21

Mode 0x0311: 640x480 (+ 1280), 16 bits

22

Mode 0x0312: 640x480 (+ 2560), 24 bits

23

Mode 0x0314: 800x600 (+ 1600), 16 bits

24

Mode 0x0315: 800x600 (+ 3200), 24 bits

25

Mode 0x0317: 1024x768 (+ 2048), 16 bits

26

Mode 0x0318: 1024x768 (+ 4096), 24 bits

27

Mode 0x031a: 1280x1024 (+ 2560), 16 bits

28

Mode 0x031b: 1280x1024 (+ 5120), 24 bits

29

Mode 0x0330: 320x200 (+ 320), 8 bits

30

Mode 0x0331: 320x400 (+ 320), 8 bits

31

Mode 0x0332: 320x400 (+ 640), 16 bits

32

Mode 0x0333: 320x400 (+ 1280), 24 bits

33

Mode 0x0334: 320x240 (+ 320), 8 bits

34

Mode 0x0335: 320x240 (+ 640), 16 bits

35

Mode 0x0336: 320x240 (+ 1280), 24 bits

36

Mode 0x033d: 640x400 (+ 1280), 16 bits

37

Mode 0x033e: 640x400 (+ 2560), 24 bits

38

Mode 0x0345: 1600x1200 (+ 1600), 8 bits

39

Mode 0x0346: 1600x1200 (+ 3200), 16 bits

40

Mode 0x034a: 1600x1200 (+ 6400), 24 bits

41

Mode 0x034b: 1360x768 (+ 1360), 8 bits

42

Mode 0x034c: 1360x768 (+ 2720), 16 bits

43

Mode 0x034d: 1360x768 (+ 5440), 24 bits

44

Mode 0x0360: 1280x800 (+ 1280), 8 bits

45

Mode 0x0361: 1280x800 (+ 5120), 24 bits

46

Mode 0x0371: 1360x768 (+ 5440), 24 bits

47

Config Status: cfg = new, avail = yes, need = no, active = unknown

48

Tsl0922 @ ubuntu :~ $

My laptop resolution is 1366x768, so what I need is: 1360x768-24

 

(4) modify the grub File

 

 

1

Sudo gedit/etc/default/grub

Bytes -------------------------------------------------------------------------------------------------------------------

# If you change this file, run 'Update-grub 'afterwards to update

#/Boot/grub. cfg.

 

GRUB_DEFAULT = 0

GRUB_HIDDEN_TIMEOUT = 0

GRUB_HIDDEN_TIMEOUT_QUIET = true

GRUB_TIMEOUT = 10

GRUB_DISTRIBUTOR = 'lsb _ release-I-s 2>/dev/null | echo Debian'

GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash nomodeset video = uvesafb: mode_option = 1360x768-24, mtrr = 3, scroll = ywrap"

GRUB_CMDLINE_LINUX = ""

 

# Uncomment to disable graphical terminal (grub-pc only)

# GRUB_TERMINAL = console

 

# The resolution used on graphical terminal

# Note that you can use only modes which your graphic card supports via VBE

# You can see them in real GRUB with the command 'vbeinfo'

# GRUB_GFXMODE = 1360x768

 

# Uncomment if you don't want GRUB to pass "root = UUID = xxx" parameter to Linux

# GRUB_DISABLE_LINUX_UUID = true

 

# Uncomment to disable generation of recovery mode menu entries

# GRUB_DISABLE_LINUX_RECOVERY = "true"

 

# Uncomment to get a beep at grub start

# GRUB_INIT_TUNE = "480 440 1"

Bytes -------------------------------------------------------------------------------------------------------------------

(5) Modify initramfs:

 

1

Sudo gedit/etc/initramfs-tools/modules

Bytes -------------------------------------------------------------------------------------------------------------------

# List of modules that you want to include in your initramfs.

#

# Syntax: module_name [args...]

#

# You must run update-initramfs (8) to effect this change.

#

# Examples:

#

# Raid1

# Sd_mod

Uvesafb mode_option = 1360x768-24 mtrr = 3 scroll = ywrap

Bytes -------------------------------------------------------------------------------------------------------------------

 

(6) force the use of Framebuffer:

 

1

Echo FRAMEBUFFER = y | sudo tee/etc/initramfs-tools/conf. d/splash

(7) Update grub and initramfs:

1

Sudo update-grub2

2

Sudo update-initramfs-u

(8) Restart

 

From the blog of tsl0922

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.