Install Oracle9irac on Solaris + EMC + Veritas---All things you should know

Oracle
This article links:

Http://www.eygle.com/ha/Install.Oracle9iRac.On.Veritas.EMC.htm

The main hardware and software used in this case are as follows:

Host: sun-fire-v210
Operating system: SunOS 5.9 generic_117171-07
Fiber Card: Emulex lightpulse fc9002l
Arrays: EMC CLARiiON CX500
Cluster software: VERITAS STORAGE FOUNDATION for ORACLE RAC 4.0
Oracle version: Oracle9.2.0.4

1. Install the operating system

After installing the basic system, apply to the latest patches





# uname-a
SunOS cluster1 5.9 generic_117171-07 sun4u SPARC sunw,sun-fire-v210





Configure the Hosts file, set the appropriate alias, and configure a floating IP (required when configuring cluster)




# cat/etc/hosts## Internet host table#127.0.0.1 localhost 172.16.33.71 cluster2 cluster2.hurray.com.cn loghost172.16.33 . cluster1 cluster1.hurray.com.cn 172.16.33.74 Cluster cluster.hurray.com.cn




2. Install Fiber Card

This example uses the Emulex light card, Emulex Lightpulse fc9002l light card needs to download the latest driver installation on the website

Using the drive system on the disc would be inexplicably recycled, extremely depressing.



Light Card installation Log reference:

Emulex_lightpulse_fc9002l_solaris9_install

Fibre card setup requires two parameter files to be configured after installation:

Modification of Emulex Fiber card LPFC configuration file

After completing this step, reboot the machine, make the configuration effective, and connect the host to the fibre switch and the EMC array



3. Install the EMC Navisphere AGENT (naviagent)

Install the EMC Navisphere AGENT (naviagent)

When the installation is complete, reboot the server, and the agent will start automatically, and the host node should be visible from the EMC array controller



4. Allocating Disk Groups

On the EMC array side, assign the zoned disk group to the host

Allocating disk groups (EMC arrays)

After allocating the disk group, reboot the host

5. Install Veritas STORAGE FOUNDATION for ORACLE RAC 4.0 software

Install Veritas Storage fundation for Oracle Rac4.0



6. Configure Shared disks

To configure a shared disk using Volume Manager



7. Modify system Kernel Parameters

Preparing for Oracle Installation

The following parameters are appended to the end of the/etc/system file, and both hosts need to be modified:





* kernal parameter for Oracle database add By:gqgaiset shmsys:shminfo_shmmax=4294967295set shmsys:shminfo_shmmin=1set Shmsys:shminfo_shmmni=100set Shmsys:shminfo_shmseg=10set Semsys:seminfo_semmni=1024set semsys:seminfo_semmsl= 1510set Semsys:seminfo_semmns=3010set Semsys:seminfo_semopm=100set semsys:seminfo_semvmx=32767



Reboot host after modification

8. Divide the bare equipment

Divide the bare equipment according to the actual need



Vxassist-g oradg-u Gen Make system 800mvxassist-g oradg-u gen Do temp 1000mvxassist-g oradg-u gen make users 1000m Vxassist-g oradg-u Gen make redo101 100mvxassist-g oradg-u gen make redo102 100mvxassist-g oradg-u Gen make redo103 100mvxassist-g oradg-u Gen make redo201 100mvxassist-g oradg-u gen make redo202 100mvxassist-g oradg-u gen make Redo 203 100mvxassist-g oradg-u Gen make undo11 1000mvxassist-g oradg-u gen make undo21 1000mvxassist-g oradg-u Gen SPFile 100mvxassist-g oradg-u gen make ctlfile1 100mvxassist-g oradg-u gen make ctlfile2 100mvxassist-g oradg-u Gen Make Srvcfg 500m


Modify the Owner information:



Vxedit-g ORADG set user=oracle mode=644 systemvxedit-g ORADG set user=oracle mode=644 temp vxedit-g ORADG Set User=orac Le mode=644 users vxedit-g ORADG set user=oracle mode=644 redo101vxedit-g ORADG set user=oracle mode=644 redo102vxedit- G ORADG set user=oracle mode=644 redo103 vxedit-g ORADG set user=oracle mode=644 redo201vxedit-g ORADG set user=oracle m ode=644 redo202vxedit-g ORADG Set user=oracle mode=644 redo203vxedit-g ORADG set user=oracle mode=644 undo11 vxedit-g o RADG set user=oracle mode=644 undo21 vxedit-g ORADG set user=oracle mode=644 spfile vxedit-g ORADG set user=oracle mode= 644 Ctlfile1 vxedit-g ORADG set user=oracle mode=644 ctlfile2vxedit-g ORADG set user=oracle mode=644 srvcfg




9. Copy the corresponding library file



# cd/opt/orclcluster/lib# ls9ir2# cd *# lslibskgxn2_32.so libskgxn2_32.so.1 libskgxn2_64.so libskgxn2_64.so.1 Libskgxp92_32.so libskgxp92_64.so# CP libskgxn2_64.so. /libskgxn2.so# lslibskgxn2_32.so libskgxn2_32.so.1 libskgxn2_64.so libskgxn2_64.so.1 libskgxp92_32.so. So


10. Install Oracle Software

Install oracle9i Software



11. Configure the Bare device list

Setting Dbca_raw_config Environment variables

Creating a Dbca_raw_config.txt configuration file



Control1=/dev/vx/rdsk/oradg/ctlfile1
Control2=/dev/vx/rdsk/oradg/ctlfile2
Redo1_1=/dev/vx/rdsk/oradg/redo101
redo1_2=/dev/vx/rdsk/oradg/redo102
redo1_3=/dev/vx/rdsk/oradg/redo103
redo2_1=/dev/vx/rdsk/oradg/redo201
redo2_2=/dev/vx/rdsk/oradg/redo202
redo2_3=/dev/vx/rdsk/oradg/redo203
Spfile=/dev/vx/rdsk/oradg/spfile
System=/dev/vx/rdsk/oradg/system
Temp=/dev/vx/rdsk/oradg/temp
Users=/dev/vx/rdsk/oradg/users
Undotbs1=/dev/vx/rdsk/oradg/undo11
Undotbs2=/dev/vx/rdsk/oradg/undo21




Set in the user profile:



Dbca_raw_config=/opt/oracle/admin/rac9i/create/dbca_raw_config.txt
Export Dbca_raw_config



12. Start creating a Database

Creating a oracle9i RAC Database