Install the Broadcom wireless NIC Driver on CentOS 7

Source: Internet
Author: User

Install the Broadcom wireless NIC Driver on CentOS 7

First, make sure you are the lucky guy with the Broadcom BCM43xx wireless network card ":

/Sbin/lspci | grep Broadcom
0b: 00.0 Network controller: Broadcom Corporation BCM4312 802.11a/B/g (rev 01)

Install the required components:

Sudo yum install kernel-headers kernel-devel gcc

Download the driver installation package here. Then use the root account to unbind the installation package and change the owner to a common user:

[root@host ~]# mkdir -p /usr/local/src/hybrid-wl
[root@host hybrid-wl]# cd /usr/local/src/hybrid-wl
[Root @ host hybrid-wl] # tar xvfz/path/to/the/tarball/hybrid-portsrc-x86_64-v5.10.91.9.3.tar.gz (download file name and path)
[root@host hybrid-wl]# chown -R someuser.somegroup /usr/local/src/hybrid-wl

Note: Why not extract it to a single location and retain the Default owner?

The reason is that the above practice will keep the source code of the driver module on the system -- where you place them -- so that you can create the driver as needed at any time (for example: you upgraded the kernel level-because the driver module is always compiled based on a certain kernel), and you can compile it with unprivileged users!

Then make, but I reported the following error:

KBUILD_NOPEDANTIC = 1 make-C/lib/modules/'uname-R'/build M = 'pwd'
Make: ***/lib/modules/3.10.0-123. el7.x86 _ 64/build: the file or directory does not exist. Stop.
Make: *** [all] Error 2

In fact, after the update is installed, restart the following computer to solve the problem. If the problem persists:

Then I checked the folder and found a bad connection and fixed it:
Cd/lib/modules/3.10.0-123. el7.x86 _ 64
Ln-fs/usr/src/kernels/3.10.0-123.4.2.el7.x86 _ 64 build

Make again

Cd/usr/local/src/hybrid-wl
Make

The ideal output is as follows:

KBUILD_NOPEDANTIC = 1 make-C/lib/modules/'uname-R'/build M = 'pwd' make [1]: go to the/usr/src/kernels/3.10.0-123.4.2.el7.x86 _ 64 directory. The 80211 API is prefered for this kernel versionUsing limit 80211 api cc [M]/usr/local/src/hybrid-wl /src/shared/linux_osl.o CC [M]/usr/local/src/hybrid-wl/src/wl/sys/wl_linux.o CC [M]/usr/local/src/hybrid -wl/src/wl/sys/wl_iw.o CC [M]/usr/local/src/hybrid-wl/src/wl/sys/wl_rj80211_hybrid.o LD [M]/usr/local /src/hybrid-wl/wl. oWARNING: modpost: missing MODULE_LICENSE () in/usr/local/src/hybrid-wl/wl. osee include/linux/module. h for more informationWARNING:/usr/local/src/hybrid-wl/wl. o (. data + 0x150f40): Section mismatch in reference from the variable wl_pci_driver to the function. init. text: wl_pci_probe () The variable wl_pci_driver referencesthe function _ init wl_pci_probe () If the reference is valid then annotate thevariable with _ init * or _ refdata (see linux/init. h) or name the variable: * _ template, * _ timer, * _ sht, * _ ops, * _ probe, * _ probe_one, * _ console Building modules, stage 2. limit 80211 API is prefered for this kernel versionUsing limit 80211 api modpost 1 modulesWARNING: modpost: missing MODULE_LICENSE () in/usr/local/src/hybrid-wl/wl. osee include/linux/module. h for more informationWARNING:/usr/local/src/hybrid-wl/wl. o (. data + 0x150f40): Section mismatch in reference from the variable wl_pci_driver to the function. init. text: wl_pci_probe () The variable wl_pci_driver referencesthe function _ init wl_pci_probe () If the reference is valid then annotate thevariable with _ init * or _ refdata (see linux/init. h) or name the variable: * _ template, * _ timer, * _ sht, * _ ops, * _ probe, * _ probe_one, * _ console CC/usr/local/src/hybrid-wl/wl. mod. o LD [M]/usr/local/src/hybrid-wl/wl. komake [1]: Leave the directory "/usr/src/kernels/3.10.0-123.4.2.el7.x86 _ 64"
Load driver

After you successfully compile the driver module, you can load it into the kernel and set it to automatically load the driver at startup (to do this, you must use the root permission ). Of course, to do this first, you must delete the current wireless driver module from the kernel (if any ):

[Root @ host ~] # Rmmod bcm43xx
[Root @ host ~] # Rmmod b43
[Root @ host ~] # Rmmod b43legacy
[Root @ host ~] # Rmmod ndiswrapper

Then load the driver:

Make install
Depmod 'uname-r
Modprobe wl

OK! Finally, paste a picture:

For more information, see the official centos guide.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.