When installing the mini2440 USB download driver under win7, first let's talk about my system environment: win7 flagship edition 32-bit. below is the specific process. 1, download DRIVER: http://115.com/file/dp4o4dqh#ourdev_637190A48PHG.zip license prompt installation MINI2440.inf step) 3, connected to the serial port, USB download line, in Nor Flash mode to open the power to install the USB download driver will appear the following failure prompt: www.2cto.com
4. Open the Device Manager and find the SEC S3C2410X Test B/D device (with an exclamation point ): right-click "SEC S3C2410X Test B/D" device-> click "Update driver software"-> click "Browse computer to find driver software"-> select ......... \ ourdev_63720.a48phg \ SuperVivi-Transfer-Tool-Complete \ Driver directory installation. The following prompt indicates that the driver is successfully installed. You can also find the Mini 2440 Dev Board device in the Device Manager, which is not far from success:
5. Run the supervivi-usb-transfer-tool.exe program in the programcated. (If the program does not respond, you can download the USB download line before running the program.) If the Mini2440 connected is displayed, the connection is successful. (Remember to use this tool for downloading, not the dnw on the MINI2440 CD)
In the serial port view: www.2cto.com Click Upload to select a file to download. The following is how I downloaded the file system rootfs_qtopia_qt4.img. Of course, you want to use this tool as a serial port. Is it very powerful? Author: zxj2018