Install Windows 7 on a USB flash drive and Windows 7 on a USB flash drive

Install Windows 7 on a USB flash drive and Windows 7 on a USB flash drive
Windows 7 installation preparation

1. iso system image files (I usually use the pure version)

2, Windows7-USB-DVD-Download-Tool-Installer-en-US (BOOT disk production)

3. Prepare a 4G or above empty USB flash drive, which will be formatted later. Do not place important files.

4. c disk (System Disk) with more than 8 GB Space

5. Back up the NIC driver or prepare the universal driver tool. Because the new system is installed without a network (I am using the universal driver here)

Start to insert a USB flash drive.

Download and install Windows7-USB-DVD-Download-Tool-Installer-en-US: http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

After the installation is complete, double-click to run the program (usually there will be a startup item on the desktop)

Select the prepared iso Image File

Click USB device

If the USB flash drive has been inserted before, it will be automatically detected here. Click Begin copying.

Wait until the disk is ready.

System Installation

Open your USB flash drive and you will see the following directory structure. This is the boot disk we have created.

Double-click setup to start Installation

Click Install now

Accept the terms and then proceed

Select Custom advanced

Select your system disk. Generally, it is a C disk and the free space must be more than 8 GB. Then click confirm next.

During this time, the system will be restarted multiple times, so be patient and wait for automatic installation.

Then select the language and create an account. You can complete the process as prompted.

You can skip this step and proceed to the next step before activating it.

Recommended settings

Next step

This is done with a very clean desktop.

Install NIC Driver

Start the ready hichina driver

Click Start. If your network is good before installing the system, wait for a while and you will find that the network in the lower right corner is ready for use.

Now your system can access the Internet.

Delete old system

Open the system disk (drive C) and you will see a windows. old folder. This is the old system, which occupies the position and needs to be deleted.

Right-click drive C and select Properties

Click disk cleanup

Click to clear system files

Select "previous windows installation" and click "OK". Wait for the old system to be deleted.

All ends here