Install WinXP system tutorial via CD

The first step is to set the disc to boot:

1, start the computer, hold down the DEL key, until appear as a blue background, yellow English Word BIOS Setup window.

2, select and enter the second item, "Biossetup" (BIOS setup). Locate the item or group that contains the boot text, and find the "first" secend "third" three items in order, representing "start of" "Start" and "Third start" respectively. Set to "CD-ROM" floppy drive "hard disk" in order. (If this page does not see these three E, usually boot to the right of the option menu is "SETUP", then press ENTER to see the entry) should choose "First" hit Enter, in the out of the submenu Select CD-ROM. Press ENTER again.

3, choose a good starting mode, press F10 key, appear e-Text dialog box, press "Y" key, and enter, the computer automatically restart, proof that the change of the settings effective.

Step two, install the XP system from the CD

1, insert the XP installation CD-ROM before restarting the computer, press ENTER when the word appears on the screen. This is to start the light, otherwise the computer will skip the light boot from the hard drive, read the hard drive.

2, the launch of XP system CD will appear after the blue background of the installation interface, then the system will automatically analyze the computer information, know that the monitor screen darkened before the need for any operation, then will appear in the blue background of the Chinese interface.

3, the above operation will appear after the XP system agreement, press F8 Key agreed to this agreement, and then you can see the hard disk all the partition information list, and have the Chinese operation instructions. Select C disk, press D to delete the partition (remember the first C disk of useful files for backup), the location of the C disk into "not zoned", and then in the original C-disk location (that is, "not zoned" location) press C to create the partition, the partition size need not be adjusted. After the original C disk position into the "new unused" word, press ENTER to continue. The next step is the possibility of formatting the partitioning Options page, which is recommended for "format partitions with FAT32 (quick)." Press ENTER to continue.

4, the system format C disk, and then analyze the hard disk and the previous Windows operating system, and then copy the file, about 8-13 minutes (according to the configuration of the machine decision).

5, copy the file completed (100%), the system will automatically restart, when the CD-ROM again see ... , you do not need to press any key to enable the system to boot from the hard drive, as part of the installation file has been copied to the hard drive (note: The disc cannot be removed at this time).

6, the blue background of the Color XP installation interface, the left side has the installation progress bar and the remaining time display, the starting value of 39 minutes, but also according to the configuration of the machine, usually p4,2.4 machine installation time is about 15-20 minutes.

7, installation end, the computer automatically restart before, in addition to the input serial number and computer information (fill in at will), and knock 2 to 3 times return, do not need to do any other operation. The installation will be completed automatically by the system.

Step three, drive the installation

1, after the reboot, the CD out, let the computer from the hard drive, into the XP Settings window.

2, in turn, press "Next", "Skip", select "Do not register", "completion."

3, into the XP system desktop.

4, the right mouse click on the desktop, select "Properties", select the "Display" tab, click on the "Custom desktop" item, check "My Computer", select "OK" exit.

5, back to the desktop, right click on "My Computer", select Properties, select the Hardware tab, and select Device Manager, which is the management window for all hardware in the computer, in which all previous options for yellow question mark + exclamation marks represent hardware that does not have a driver installed, double hit open its properties, and select Reinstall the driver, put it in the appropriate drive disc, select "Auto Install", the system will automatically recognize the pair should be driver and install complete. (Audio for the sound card, VGA for the video card, SM for the motherboard, you need to first install the motherboard driver, such as no SM items are not installed). Restart the computer after all drivers have been installed. The driver installation is complete.

Through the small series for you to introduce the above three steps, a complete XP system so that the installation is complete, although the installation needs to have a certain amount of time, but it is very convenient oh.