Install with old peaches U disk: [3]ghost version Win7 system

To install Ghost version Win7 automatically with old Peaches:

1, to the Internet first download ghost version of Win7 image file to the hard disk, I put to a USB flash drive, drive letter Z, if you like, you can directly put to the hard disk, put to the hard disk installation speed will be a bit faster.

2, the production of the old Peaches start USB stick on the computer, and then boot.

In the case of a new Uefi BIOS, you can start from the USB stick by simply pressing F12 to enter the Quick Launch menu and selecting the name of the USB stick from the menu.

In the case of an older BIOS, you must press del or F2 to enter the BIOS,

Then under the Advanced BIOS features project, or boot, or startup,

Locate the first boot device or the 1st boot device, and then set the USB-HDD or USB stick name to

Specific methods to see your motherboard instructions, or to search online.

Enter the old Peaches start USB interface, select the third "run Old Peaches Win8pex86 system (anti-blue screen)".

3, one, into the PE interface, found 1 old Peaches PE one key installed, double-click Run, display a key installed main interface, usually automatically search the computer disk all ISO and Gho files.   　      Second, if there is no search, you can click on the "Open" button at 2, manually select the downloaded image file to the USB drive, if it is an ISO format file, will automatically search the file in the Gho format file, of course, you can also extract the ISO files in advance, the Gho file to the USB stick.      Three, then select the installation partition disk, in the 3rd place, because under the PE, the drive letter is not the same as the previously seen drive letter, so according to the size of the disk to determine which is the C drive. Four, when the above are confirmed to choose, click the "OK" button. 4, pop up the last confirmation box before installation, if everything is ready, click "Yes". 5, start copying files to the system disk, this process takes about a few minutes, please wait patiently. 6, wait for the file to copy to the C drive completely end, popup Complete confirmation box, click "Yes", will restart the computer, will go to the next stage of the installation process. 7, after restarting the computer, you can unplug the USB flash drive.

If you previously started the method with the F12 shortcut menu, it will automatically boot from the hard disk.

If it was set up in the BIOS from the USB flash drive, then it will enter the BIOS again, the boot from the USB drive to boot from the hard disk, press F10 save, restart will start from the hard disk, the next stage of the system installation process, it takes a certain amount of time, patience to wait.

8, and so on the installation deployment process completes, will enter the Windows7 desktop, can use the WINDOWS7 system.

The entire installation process is complete, and the next article describes how the original Windows7 is installed.

To install the ghost version of the Win7 step with the manual Ghost method:

9, how to enter the PE, the above has been introduced, so here no longer tell, directly in the PE interface to open the "manual Ghost" This program, pop-up Ghost32 11.0 main interface, directly press "OK".

10, enter this screen, first select Local, then select Partition, and then select FromImage.

11, to this is the time to select the image file, select the image file on the USB drive, this time the image file is placed in the G-Disk GHO folder, the image file name is Gho.gho, size 662MB or so.

Click 1 to select, click on 2 to open this file.

12, to this interface is the choice of hard disk, if the computer has a few hard disk, here will show a few items, select you want to install the system's hard disk, I have two hard disk, so show two, to here, is a lot of novice most troublesome place, mainly do not know what is here, or choose which hard disk, Because there is no hard disk name, there is no drive letter, so it is difficult to understand, here, tell everyone a skill, look at the size of the hard disk, because the average person to the size of their own hard disk is relatively clear, so just look at the size here, you can determine which piece of hard disk, here the first hard disk is 40960MB, Because 1024mb=1g, that is, about 40G, select and then press "OK".

13, choose which piece of hard disk, come here to choose which partition disk on the hard drive to install the system, here for beginners, as hard to distinguish with the above, as above, using the same method, with the partition disk size to identify, select good, press "OK" button.

14, here is the process of copying image files to the system partition disk, it will take a few minutes, please wait patiently, after the copy is complete, restart the computer, unplug the USB flash drive, into the system deployment and installation process, the process is automatic, no need to pipe, as long as the wait can, after installation, into the Windows desktop, You can use the computer.

ENDPrecautions

• Select the disk to install the system is a difficult point, because in PE, the disk Inode and the original, if it is in manual ghost, will not appear the letter, and all are English, identification difficult to understand, so the best way is to identify the size of the disk, so more accurate.
• If it is an old-fashioned bios, this is a difficult point, so in advance to understand the BIOS setup method, test USB drive boot situation.
• Ghost version of the image file Win7.iso can be placed on a USB flash drive, can also be placed on the hard disk, but must not be placed on the C drive, also cannot appear in the image file path in Chinese, otherwise it will not be recognized, cannot find the image file.

Install with old peaches U disk: [3]ghost version Win7 system