Installation and use of Windows 7 system wireless network card

One, wireless card installation

The installation of a wireless card requires two steps:

Hardware installation

1, USB wireless network card, please plug in the computer USB interface, or use extension cord plug into the computer USB interface.

2, PCI wireless card, please insert the chassis PCI slot before the computer starts.

3, CardBus wireless network card, please insert the notebook computer CardBus interface.

Driver installation after hardware installation:

Drive Installation

First, the Windows 7 system with the Secretary of the majority of our wireless network card driver, these NIC hardware installed after the installation does not need to manually drive installation can be used.

The system automatically searches for the installation drive process as follows:

1, the Windows 7 system detects the wireless network card, installs the driver automatically, the following figure:

2, the successful installation of network card driver.

If you do not want to use the system's own drive or system installation drive failed, you can manually install the wireless network card driver.

1, in our website download windows 7 system driver (also can install Vista system drive).

2, the desktop icon " computer " on the right click, select " Management ."

2, select " Device Manager ", in the yellow identification device on the right click to select " Update driver software ."

3, select " Browse the computer to find driver software ."

4, click " Browse ".

5. Select the folder where the driver is located and click " OK ". 64-bit system Please select Windows7 64-bit folder.

6, click " next ".

7, if the following pop-up dialog box, select " always install this driver software ."

8. Successful installation of driver.

Second, configure wireless network card connection wireless router

1. View wireless security settings in the wireless router. (We recommend setting WPA-PSK/WPA2-PSK AES encryption)

2, click on the lower right corner of the computer network connection icon, select the wireless router signal, click "Connect." If there is no signal to connect, please click on the top right corner to refresh the button.

3, enter the network security key, that is, the password set on the wireless router.

4, is connecting the network.

5, the connection is successful.